Glossy Finish 3K Carbon Fiber Round Tube For Robotics Arms

Best Quality Cheap Price Strong Corrosion Resistance 3K Carbon Fiber Round Tube

3K Carbon Fiber Round Tube Physical and Chemical Properties:

Carbon fiber tube has the advantages of high strength, long life, corrosion resistance, lightweight, and low density. It is widely used in kites, aviation model aircraft, lamp brackets, PC equipment shafts, etching machines, medical equipment, sports equipment, and other mechanical equipment. A series of excellent performances such as dimensional stability, electrical conductivity, thermal conductivity, small coefficient of thermal expansion, self-lubricating, and energy absorption and shock resistance. And has a high specific modulus, fatigue resistance, creep resistance, high-temperature resistance, corrosion resistance, wear-resistance, and so on.

The disadvantage is that it has electrical conductivity (Ωcm - 1.5 × 10-3), which has the advantage of the very good tensile strength (for example, the tensile strength in kg/mm2 - 400 in 12000 filament units).

The content of carbon fiber used in the production of carbon fiber tubes directly determines its mechanical performance and value. Carbon fiber tube has the characteristics of lightweight, firmness, and high tensile strength, but special care should be taken to prevent electricity during use.

Product Description:

• Lightweight and high strength. It is lightweight, only one-fourth of the steel, easy to transport and install. Compared with plastic products, its strength is several times higher.
• Corrosion resistance, aging resistance, long life. Carbon fiber products have good resistance to acid, alkali, salt, and some organic solvents, and are much better than other metals in corrosion protection. In addition, it has good water resistance and aging resistance, so its service life is up to 25 years, no matter in a corrosive environment and harsh outdoor, humid environment.
• Anti-ultraviolet and smooth surface. Because of its lightweight and high strength, it is replacing steel.

Parameter:

Material: 100% real carbon fiber composite, T300 carbon fibers.

Lay up: Both Sides 3K +Middle UD Carbon

Weave: twill, plain or one-way cloth

Surface finish: glossy or matte

Color: black or customized

Length: 500mm,1000mm, or customized
Outside diameter: 6-40mm or customized
Processing: CNC machining per your requirement

Technique: Roll-wrapped
OEM Service: Accept

Product Features:

1. High strength

2. Good tenacity

3. High corrosion-resistance

4. Excellent structural properties

5. Dimensional stability

6. Smooth finish on the surface

7. Good resilience

8. Lasting performance

9. Consistent cross-section

10. Variety of colors for choice

Specifications:

3K Carbon Fiber Tubes Industry Applications:

Carbon fiber tubes widely used in model aircraft, stationary and sports equipment, kites with special effects, medical equipment, military equipment, and so on.

Products Applications:

Carbon fiber tubes used in Electronic cigarettes, Agricultural protection drone, Automobile accessories, Sports equipment, Carbon fiber arrows, Flagpole, Gun barrel, Machinery and equipment, Building.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.