Epoxy Resin 3K Carbon Fiber Tube High Temperature Heat Resistance Glossy Surface

High Temperature Heat Resistance Epoxy Resin 3K Carbon Fiber Tube/Pipe

Carbon fibre rods and tubes are manufactured by pulling or wrapping carbon fibres and epoxy resin to a desired diameter/cross-section to form a densely reinforced carbon composite. Carbon fibre has unique properties making it ideal for applications ranging from aerospace to automobiles, to sporting goods.

Here you can get Pultruded Carbon Fibre rod, Pulbraided Carbon Fibre rod and 3K Roll-wrapped Carbon fibre rod of varying dimensions. This Carbon Fiber Rods are exceptionally straight and rigid, UV resistant and are the ideal building material for frames, trusses and for use as reinforcing material.

Fabric

Looks dark black, has a woven exterior (traditional Carbon Fiber look) and is glossy – texture has cello lines (textured ribbing)
Sanded version retains the woven exterior, looks grey in color, matte and is paint / bond ready – texture is smooth
Comprised of various angle plies throughout the layup with the outer (and sometimes inner ply) being a woven carbon fiber fabric either plain weave (checkerboard pattern) or twill (diagonal bias pattern)

IN GENERAL tubes listed as "Fabric" are comprised of ~65% (0) degree unidirectional plies = Good bending stiffness & ~25% (90) or (+45/-45) degree Multi-directional plies = Good torque resistance & crushing strength & ~10% (0/90) weave for the outermost layer = Good looks and provides good strength guarding against damage

Uni

Looks solid dark black and is glossy – texture has cello lines (textured ribbing)
Sanded version looks solid grey in color, matte and is paint / bond ready – texture is smooth
Also comprised of various angle plies throughout the layup with the outer ply being a unidirectional layer of Carbon Fiber
IN GENERAL tubes listed as "Uni" are comprised of ~70% (0) degree unidirectional plies = Good bending stiffness & ~30% (90) or (+45/-45) degree Multi-directional plies = Good torque resistance & crushing strength

Filament Wound

Looks vary quite a bit though generally these tubes have a “delta” “large thread weave” pattern to them, glossy – texture has cello lines (textured ribbing)

Sanded version looks grey in color, sometimes takes on a “camo” type look, matte and is paint / bond ready – texture is smooth
Comprised of purely angled plies of carbon fiber – Fiber angles vary from ~15 to ~80 degrees

Our Service:

1. It ensures that a year of quality assurance and 24 hours online customer service.

2. Protection of your sales area, ideas of design, and all your private information.

3. Request for samples is accepted.

4. Drilling and slotting are accepted.

5. We guarantee the products to be manufactured with the finest materials and mature technics.

All tubes can be repaired at no charge if returned to us, postage prepaid, within one year.

FAQ:

1. Can you produce according to the samples or drawings?
Yes, we can produce your samples or technical drawings. We can create the molds and fixtures.

2. What are your terms of payment?
Usually, we accept T/T, irrevocable L/C at sight. For regular orders, Terms of payment 30% deposit, balance before shipment.

3. What is the lead time?
It usually takes 25 to 35 days after sample confirmation and receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

4. What are your terms of packing?
Generally, we pack our goods in neutral cartons. It is fragile we will make the wooden frame. and we also can according to your requirements.

5. What are your terms of delivery?
We accept EXW, FOB, CIF, etc. You can choose the one which is the most convenient or cost-effective for you.

6. How to solve the quality problems after sales?
Take photos of the problems and send them to us. We will make a satisfied solution for you within 24 hours after we confirm the problems.

7. Is it OK to print my logo on carbon fiber products?
Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

8. You are a manufacturer or trading company?
We are a factory. Welcome to visit our factory at any time.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.