Locking System Carbon Fiber Telescopic Pole ​Inspection Corrosion Resistance

Strong Corrosion Resistance Locking System Telescopic Pole Inspection

Our telescopic pole inspections can be used vertically for work above ground and also for work below. Using our pole inspection and survey camera systems to save time, cut costs and slash red tape in health and safety and can even avoid getting your hands dirty in some cases!

Description

Telescopic pole inspections can save the expense of climbing ladders and can reduce the need for hiring costly scaffolding or inspection towers, the use of which is becoming more troublesome thanks to health & safety legislation.
Specifications
Material: carbon fiber, fiberglass, or composite materials.
Segment: 6 to 9 sections.
Extended height: 6m, 8m, 10m, 13m.
Collapsed height: 1.33m, 1.73m, 1.87m, 1.94m.
Max Pole Diameter: 51mm.
Locking system: horizontal locking clamps.
Surface: natural fiberglass, UD, or 3K twill weave.
Camera mount: 1/4" and 3/8" screw.
Applications

Telescopic pole inspections are becoming more and more popular in many industries for tasks such as roof and building inspections, aerial photography, inventory checks, gutter cleaning, wildlife surveying or loss adjustment. The time saved by inspection with a telescopic pole inspection can be immense when added up over a years worth of jobs.

LIJIN has been dedicated to the carbon fiber products industry for over 10 years. With the strength of Carbon Fiber Telescopic poles. Our products have obtained very good fame among customers all over the world. We welcome your new inquiries.

Product name: 20/22ft/25ft/35ft/40ft/45ft/50ft/65ft Carbon Fiber Telescopic Pole with Clamps

Application: Window cleaning, camera, aerial photography, fruit harvest, search, and rescue, etc

Sizes available: 4ft to 85ft.
Surface finish: matt/glossy
Customize: Yes, we can customize the sizes as per customers' request
Sample available: Yes, we can provide the sample for your testing.

Detailed Size:

CHARACTERISTICS:
• Extended total length: 5000mm. (Tolerance ± 10mm.)
• Total length collected: 1360mm. (Tolerance ± 10mm.)
• Outside diameter of the larger tube: 31mm. (Tolerance ± 0.2mm.)
• Wall of the tubes: 1mm. (Tolerance ± 0.2mm.)
• Total weight: 812gr. (Tolerance ± 50gr.)
• Fiber: carbon 3K 200 gr / m2 Fabric Twill 2x2 (Twill)
• Resin: Epoxy
• Orientation of the fibers: Bidirectional

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.