Low Density And Light Weight Carbon Fiber Telescopic Pole UV Resistant

Low Density and Light Weight Telescopic Pole in Carbon Fiber - UV Resistant

Carbon fiber tube: Carbon fiber tube, also known as a carbon fiber tube, is made of carbon fiber composite material pre-impregnated with styrene-based polyester resin and then cured by heating and pultrusion (twisting).In the manufacturing process, various profiles can be produced through different molds.

The telescopic pole is supplied with a high-quality, screwable end cap of aluminium (at the bottom), so any number of sections can be removed and pulled out. The rubber cap (top) fits very tightly to prevent the cap from unintentionally loosening during transport.

PROPERTY

• High tensile strength: The strength of carbon fiber is 6-12 times that of steel, and it can reach more than 3000mpa.
• Low density and lightweight. The density is less than 1/4 of steel.
• Carbon fiber tube has the advantages of high strength, long life, corrosion resistance, lightweight and low density.
• Carbon fiber tube has the characteristics of lightweight, solidity, and high tensile strength, but special attention should be paid to electricity prevention when using them.
• A series of excellent properties such as dimensional stability, electrical conductivity, thermal conductivity, low thermal expansion coefficient, self-lubricating, energy absorption, and seismic resistance.
• It has high specific modulus, fatigue resistance, creep resistance, high-temperature resistance, corrosion resistance, abrasion resistance, etc.

Applications

Window cleaning, dust wiping, vacuuming, changing bulbs, tree pruning saw, various tool handles, measuring, swimming pool cleaning, telescopic video inspection, and photography.

Detailed Size:

About us:

LIJIN is a leading manufacturer of the composite telescopic system and has advanced facilities and technology, 50% of its 6 production lines are automated manufacturing. With an advanced roll-wrapped process, our manufacturing, R&D, and sales footprint serves customers across a broad range of industries and applications, such as telescopic photography and inspection, filming, window, roof, and solar panel cleaning, telescopic reach and rescue, extendable tool, etc.

With rich experience and engineering expertise in composite materials, we work closely with our customers to design and manufacture high-quality composite telescopic systems with carbon fiber, fiberglass, and other high-performance materials. Our composites help to reduce weight, improve performance and decrease total life cycle cost, all while helping increase energy efficiency and supporting environmental sustainability.

Along with the production of carbon fiber and fiber-based products, we carry out continuous research and development to provide engineering support for our partners. With our expertise and knowledge, products can be tailor-made to suit customers' exact requirements.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.