Epoxy Resin Matrix UV Resistant Carbon Fiber Plate Corrosion Resistance Twill Weave Carbon Fiber Panel

Epoxy Resin Matrix UV Resistant Carbon Fiber Panel - Corrosion Resistance Twill Weave Carbon Fiber Plate

Carbon fiber panels offer a combination of strength, rigidity, and lightweight properties that make them an excellent choice for various engineering and design applications. When selecting a carbon fiber panel for a specific project, it's important to consider the required dimensions, thickness, and other design considerations to ensure it meets the intended performance and structural requirements

.

Carbon fiber plate is manufactured using 100% carbon fiber reinforcement and epoxy resin matrix, cured under pressure at elevated temperature to produce a carbon fiber sheet with engineering-grade mechanical properties and a class-A surface finish.

The plate has the classic 2/2 twill, 3k woven carbon fiber appearance with a pin-hole-free high gloss finish. The reverse of the sheet features an even textured 'peel ply' finish suitable for secondary bonding.

3K carbon fiber: The most popular, most common carbon fiber. It gives the plate a classic carbon fiber look. 3K is the workhorse of carbon fiber.

It's light, relatively stiff, and easy to get and make. 3K got higher elongation before failure and ultimate strength than 6K, 9K, or 12K. Because 3K is a smaller bundle of fibers, the thinner fabric can be woven than with 12k, or thinner tubing can be filament wound, but if the fiber is the same grade, stiffness, and strength are not affected by tow size. It is used in Aviation, industrial fields, architecture, sporting, and recreation goods.

Carbon Fiber Plate Features:

1. 100% 3K Carbon Fiber Strong Strength and Light Weight.
2. Perfect for any application including RC, drones, helicopters, etc.
3. The surface is cross-grain, the matte surface without any glass fiber contents.
4. These carbon fiber sheets contain 100% carbon fiber imported from Japan.
5. It is especially applicable for Multicopter, Helicopter, and RC airplanes.

Carbon Fiber Plate Typical Uses:

• General Engineering
• Robotics
• Aerospace
• Motorsport
• X-Ray/Metrology Equipment
• R/C Models

Plain Carbon Fiber Plate Advantages:

• Good flatness (minimal taper or warp)

• High gloss finish on both sides

• Pin-hole free surface finish

Carbon Fiber Plate Specification:

How to Cut and Shape?

This carbon fibre sheet can easily be cut and finished to a high standard using simple workshop tools. Cutting and finishing carbon fibre can also be perfectly safe if you follow some basic safety precautions.

Manufacturing Contracts

If you are an established manufacturing business looking for a reliable supplier of engineering quality carbon fibre sheet please call us to discuss your requirements or arrange to see some samples.

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.