Pure Carbon Fiber Plate Carbon Fiber Reinforced Plastics Sheet For UAV Drones Frames

Pure Carbon Fiber Plate Carbon Fiber Reinforced Plastics Sheet for UAV Drones Frames

We supply a wide range of products, sheets, round Carbon Tubes, exhaust and tube sleeves, and custom-made items. We manufacture many of our sheets and plates for the RC and Race Car industry which are used for chassis, wheels, and spoiler plate wings. You can choose from a large selection of weaves, matte, or gloss finishes. Customized orders are welcomed. Our company insists on the principle of "Good service, the best quality and competitive price".

We manufacture Carbon Fibre Composite polymer in the form of sheets/rods as per the client's requirement. It can be manufactured as per client drawing in the form sheet or rod, which is 10 times lighter in weight.

The carbon fiber material is a 5 times stronger compound than stainless steel and can be used in various applications, where light weight is required and stronger material to resist wear and dare and high temperature.

About this item

【Plain Weave Glossy Surface】Plain weave finish, clear texture. Carbon fiber plate has high strength and lightweight, good corrosion resistance, it has a long service life. Multi thickness of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, and 4mm for you to choose.

【100% Carbon Fiber Plate】 Made of pure carbon fiber material, without any fillers/composite layers. High-quality carbon fiber materials texture which is durable, light, and very strong.

【3K Carbon Fiber Board】This 3k carbon fiber with 3000 filaments is strong, yet lightweight as it is filled in each tow or bundle.

【Wide Application】Perfect for any application including RC airplanes, drones, helicopters, multicopters, car exteriors and interior surfaces, car door handles, cellphones, laptops, etc.

【Easy to Cut】You can easily cut out the shape that you require without much effort as the material is easy to work with yet very strong. Cut with precision and obtain fine straight edges without burs with our carbon fiber flat sheets.

Carbon Fiber Sheet Plate Specification:

Shanghai Lijin focuses on the Carbon Fiber industry and offers carbon fiber tubes, plates, and aluminum CNC services.

Being experienced in the carbon fiber applications for over 7 years, Shanghai Lijin manages customized production according to various industry standards. Shanghai Lijin started to keep in stock for some standard

sized and frequently ordered tubes and plates. This enables Shanghai Lijin to make prompt delivery. Not only

can Shanghai Lijin complete mass production orders in short period, we can even ship normal sample, prototype orders of Carbon Fiber Plate CNC parts in just SEVEN days after order confirmation when the

drawings are available. Shanghai Lijin is dedicated to solve any technical points during the production and new item developing to ensure the quality.

Carbon Fiber tube production is Shanghai Lijin’s core business and occupies 70% of our turnover.
The carbon fiber tubes Shanghai Lijin mainly produce is table-rolled and oven thermoset. The tubes can be Full Carbon or Carbon Fiber and Fiberglass composite, depending on the application, weight limit,mechanical

strength and surface requirement.Shanghai Lijin offers top quality ROUND carbon fiber tubes. The general OD tolerance we achieve is +/-0.10mm and it can be even +/-0.05mm after our special surface process.

The maximum length of the tube can be 5500mm.

Besides the traditional table-rolled carbon fiber tubes, Shanghai Lijin also offers REAL Filament wound carbon fiber tubes,which are widely used for mechanical strength like auto driving shaft, antennas, even for military

applications. The filament wound carbon tubes are wound at a certain angle like 30 or 45 degree. We invested the new production line from Jun 2013 and this increases Shanghai Lijin’s advantage in the carbon

fiber tube industry. There are just a few real filament wound carbon fiber tube manufacturers in domestic

China and we are one of them.

Since the rapid growth of UAV in the international market, instead of the standard plane like Phantom from DJI, RC fans are getting more interested in the customized multicopters. As carbon fiber is the most preferred

material for UAV, Carbon Fiber CNC parts demand is increasing. Shanghai Lijin sticks to offering OEM service for the international market, fine quality and prompt delivery.To ensure the thickness tolerance +/-0.10mm and minimum warp of the Carbon Fiber plates that are used for the cutting, Shanghai lijin execute high standard to

the plate production. For the normal thicknesses including 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm,
Shanghai Lijin keeps regular stock, to make sure the raw material will be available for cutting immediately when order is firmed.Experienced engineers are in Shanghai Lijin’s office ready to deal with different types of

drawings from customers. No matter the drawing formats are .DWG, .DXF that can be edited by AutoCAD

and used directly for production, 3D drawings like .IGS, or even draft drawings, our staff can do adjustment and change to customer’s idea. Our engineers are also good at English communication, Email and IM is easy

for them. Editing drawings for customers is FREE* of charge. Shanghai Lijin is having several professional CNC machines for carbon fiber cutting and drilling, with the capacity of cutting 20-50pcs standard full sized plate per day. The carbon fiber chassis general cutting tolerance Shanghai Lijin offer is +/-0.02mm. The

special designed cutting solution ensures the smoothness of the cutting edge.

‘Customers’ Persuit for Change, Lijin’s Motivation for Growth’, Shanghai Lijin takes customers’ demand for center, enhances the
customer satisfaction, and grows with customer.