10GBASE-SR SFP+ 850nm 300M LC XFP Moduel Media Transceiver
Brand Name:Neutral
Certification:CE, FCC, ROHS
Model Number:OFSP-8510G-03L
Minimum Order Quantity:2 pcs
Delivery Time:5-10 days, depend on the quantity
Payment Terms:L/C, T/T, Western Union, Paypal and so on
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
Floor 3,Building No.7,Tangtou 3rd Industrial Park,Shiyan Street of BaoAn District,ShenZhen City China
Supplier`s last login times:
within 26 hours
Product Details
Company Profile
Product Details
10GBASE-SR SFP+ 850nm 300M LC XFP moduel media converter transceiver
Features
1. 10Gb/s serial opticaal interface compliant to 802.3a ae
10GBASE-SR
2. Electrical interface compliant to SFF-8431 specifications for
enhanced 8.5 and 10 Gigabit small form factor pluggable module
“SFP+”
3. 850nm VCSEL tran nsmitter, PIN photo-detector
4. 2-wire interface for management specifications comp pliant with
SFF 8472 digital diagnostic mmonitoring interface for optical
transceiv vers
5. Operating case tem mperature: 0 to 70°C
6. All-metal housing foor superior EMI performance
7. Low power consum mption
8. Advanced firmware e allow customer system encryption information
to be stored in transceive er
9. Cost effective SFP++ solution, enables higher port densitie ies
and greater bandwidth
10. RoHS compliant
Applications
1. High-speed storage area networks
2. Computer cluster cross-connect
3. Custom high-speed data pipes
Inter Rack Connection
GENERAL DESCRIPTION
This 850 nm VCSEL 10Gigabit SFP+ transceiver is designed to
transmit and receive optical data over 50/125 µm or 62.5/125 µm multimode optical fiber (Table 1).
The SFP+ SR module electrical interface is compliant to SFI
electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data
lines are internally AC coupled. The module provides differential termination and reduce
differential to common mode conversion for quality signal termination and low EMI. SFI typically operates
over 200 mm of improved FR4 material or up to about 150mmof standard FR4 with one connector.
The transmitter converts 10Gbit/s serial PECL or CML electrical
data into serial optical data compliant with the 10GBASE-SR standard. An open collector compatible Transmit
Disable (Tx_Dis) is provided. A logic “1,” or no connection on this pin will disable the laser
from transmitting. A logic “0” on this pin provides normal operation. The transmitter has an internal
automatic power control loop (APC) to ensure constant optical power output across supply voltage and
temperature variations. An open collector compatible Transmit Fault (Tx_Fault) is provided.
TX_Fault is a module output contact that when high, indicates that the module transmitter has detected a
fault condition related to laser operation or safety. The TX_Fault output contact is an open
drain/collector and shall be pulled up to the Vcc_Host in the host with a resistor in the range 4.7-10 k .
TX_Disable is a module input contact. When TX_Disable is asserted high or left open, the SFP+ module
transmitter output shall be turned
off. This contact shall be pulled up to VccT with a 4.7 k to 10 k
resistor.
The receiver converts 10Gbit/s serial optical data into serial
PECL/CML electrical data. An open collector compatible Loss of Signal is provided. Rx_LOS when high
indicates an optical signal level below that specified in the relevant standard. The Rx_LOS contact
is an open drain/collector output and shall be pulled up to Vcc_Host in the host with a resistor in
the range 4.7-10 k , or with an active termination. Power supply filtering is recommended for both the
transmitter and receiver. The Rx_LOS signal is intended as a preliminary indication to the system
in which the SFP+ is installed that the received signal strength is below the specified range. Such an
indication typically points to non-installed cables, broken cables, or a disabled, failing or a
powered off transmitter at the far end of the cable.
Absolute Maximum Ratings
| Parameter | Symbol | Min | Max | Unit |
| Supply Voltage | Vcc | 0 | 3.6 | V |
| Storage Temperature | Tc | -40 | +85 | ℃ |
| Operating Case Temperature | Tc | 0 | 70 | ℃ |
| Relative Humidity | RH | 5 | 95 | % |
| RX Input Average Power | Pmax | - | 0 | dBm |
Recommended Operating Conditions
| Parameter | Symbol | Min | Typical | Max | Unit | ||
| Power Supply Voltage | Vcc | 3.135 | 3.3 | 3.465 | V | ||
| Power Supply Current | lcc | 250 | mA | ||||
| Operating Case Temperature | TC | 0 | 25 | 70 | ℃ | ||
10GBASE-SR SFP+ 850nm 300M LC XFP Moduel Media Transceiver
Inquiry Cart
0