Industrial Ultrasonic Proximity Switch , Ultrasonic Distance Sensor High Precision
Brand Name:Winston/OEM
Certification:CE,ROSH
Model Number:UB4000-30GM-E4-V1
Minimum Order Quantity:1PCS
Delivery Time:3-15days after get payment.
Payment Terms:T/T,L/C,Paypal,Online Payment,RMB/USD
Contact Now
Add to Cart
Site Member
Address:
Floor 3rd,Liufeng Building,Liushi Town,Yueqing City,Zhejiang.325604.China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Industrial Ultrasonic Proximity Switch , Ultrasonic Distance Sensor High Precision
Description
Brife introduction of ultrasonic sensor
Ultrasonic sensors present the ideal solution for non-contact position and distance measurement in all industrial areas where environmental conditions such as dust, smoke or steam may affect the sensors. Objects consisting of a variety of materials can be detected to within millimeters regardless of color or shape.
The ultrasonic sensor produces a data carrier utilizing very high frequencies that are outside the human’s audible range. The time it takes for that ultrasonic wave to pass between the sensor and the object is the value for the distance or the position.
Ultrasonic sensors have proven their reliability and precision in many industries and applications, including:
- lumber and furniture
- construction materials and equipment
- farming equipment
- level control applications
Technical data
Technical data |
General Specifications |
Sensing distance 200…4000mm |
Adjustment range 240…4000mm |
Unusable area 0…200mm |
Standard target plate 100mm×100mm |
Transducer frequency About 85kHz |
Response delay About 325ms |
Indicators/Operating means |
LED blue Power on |
LED yellow indication of the switching state Flashing:program function object detected |
LED red permanently red: Error Red,flashing:program function,object not detected |
Electrical specifications |
Operating voltage UB 10…30VDC,ripple10%ss |
No-load supply current ≤50mA |
Input |
Input type 1 TEACH-IN input Operating distance A1:-UB…+1V,operating distanceA2:+6… + UB Input impedance:>4.7KΩ TEACH-IN programmable pulse :≥1S |
Output |
Output type 1 switch output E4,NPN NO/NC,programmable |
Rated operational current 200mA,short-circuit/overload protected |
Default setting Switching point A1:70mm Switching point A2: 800mm |
Voltage drop ≤ 2.5V |
Repeat accuracy ≤ 1% |
Switching frequency f ≤ 13HZ |
Range hysteresis H 2% of the set operating distance |
Temperature influence ± 1.5% of full-scale value |
Ambient conditions |
Ambient temperature -25…70°C(248...343K) |
Storage temperature -40…85°C(233...358K) |
Mechanical specifications |
Protection grade IP67 |
Connection V1 connector(M12×1),4-pin |
Material Housing brass,nickel-plated |
Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane,cover PBT |
External synchronization
The sensor can be synchronised by the external application of a
square wave voltage. A synchronisation pulse at the
synchronisation
input starts a measuring cycle. The pulse must have a duration
greater than 100 μs. The measuring cycle starts with
the falling edge of a synchronisation pulse. A low level > 1 s
or an open synchronisation input will result in the normal
operation
of the sensor. A high level at the synchronisation input disables
the sensor. Two operating modes are available:
1. Multiple sensors can be controlled by the same synchronisation
signal. The sensors are synchronised.
2. The synchronisation pulses are sent cyclically to individual
sensors. The sensors operate in multiplex mode.
Internal synchronization
The synchronisation connections of up to 5 sensors capable of
internal synchronisation are connected to one another. When
power is applied, these sensors will operate in multiplex mode.
The response delay increases according to the number of sensors to
be synchronised. Synchronisation cannot be performed
during TEACH-IN and vice versa. The sensors must be operated in an
unsynchronised manner to teach the evaluation limits.
Dimensions
Product picture
FAQ
Q: How to order our product ?
A:1). Please tell us the model and quantity and other request you need.
2). We make the PI for you.
3). After you confirm the PI, we arrange the order for you after receiving your payment.
4). After the goods finished, we send the goods out to you and tell you the tracking number.
5). We will track your goods until you receive the goods.
Q: What's your warranty ?
A: Two years
Q: What's your shipment method?
A: We ship by Express, by air, by sea, by train. Normally we checked and compare, then provide customer the most proper shipment method.
Q: What's about MOQ?
A: First order MOQ=1pcs
Q: If i want to release order, what's the payment method you accept ?
A: We accept T/T, Paypal, Western union, L/C.
Q: If i want to release order, what's the process?
A: Thanks. You can send inquiry to us by Maoyt or send us by email, we will reply within 24hrs.
Industrial Ultrasonic Proximity Switch , Ultrasonic Distance Sensor High Precision
Inquiry Cart
0