Furniture Lab Test Equipment For Chair Backrest Tilt Mechanism Testing With BIFMA X5.1

Furniture Lab Test Equipment For Chair Backrest Tilt Mechanism Testing With BIFMA X5.1
TNJ-006 Chair Back Backward Durability Tester
Chair Back Testing Machine/ Chair Back Durability Tester/ Chair Testing Equipment

Detailed Descriptions:

Bifma X5.1 Chair backrest Tilt Mechanism Test Machine is suitable to all chairs with backward function. It is used for evaluating the durability of the chair with backward function under the loading status. Test result: Loss function after the test shall not be qualified (based on customer specified requirements can be judged).
Test purpose: Evaluate durability of the chair with backward function under the loading status.
Test object: All office chairs with back backward function.

Technical parameters of Bifma X5.1 Chair backrest Tilt Mechanism Test Machine:

Technical parameters:

Standards:
ANSI/BIFMA X5.1-2012 ,EN 1335: 2000

Test Setup:
1. The chair or fixture with attached tilt mechanism shall be restrained on a test platform. Figure 10 shows one acceptable method of restraint.
2. If adjustable features are available, all adjustments shall be set at normal use conditions
3. A cycling device shall be attached to the chair or fixture at any location appropriate to apply a controlled (push and/or pull) motion
4. A test load of 102 kg (225 lb.) shall be secured on the center of the seat (or equivalent location on the fixture).
5. Adjust the cycling device to move the mechanism between the front and back stops, without overriding or impacting either stop

Reference test method
Standards: BIFMA X5.1-2011-13 Arm Strength Test - Vertical - Static :
13.1 Applicability: This test applies to all chairs with arms.
13.2 Purpose of Test: The purpose of the test is to evaluate the ability of a chair and arm to withstand stresses caused by applying vertical forces on the arm(s).

13.4 Test Procedures
13.4.1 Functional Load
a) A force of 750 N (169 lbf.) shall be applied for one (1) minute.
b) Remove the force.

13.4.2 Proof Load
a) A force of 1125 N (253 lbf.) shall be applied for one (1) minute.
b) Remove the force.

13.5 Acceptance Level
13.5.1 Functional Load
There shall be no loss of serviceability. For a height adjustable arm, failure to hold its height
adjustment position to within 6 mm (0.25 in.) from its original set position as the result of the
loading is considered a loss of serviceability.

Dongguan Hust Tony instruments Co., Ltd ( Tony International(HK)Co., Ltd. ) has been manufacturing and developing testing machines for more than 15 years.

Our Main products are Furniture Testing Instrument, Toys Testing Equipment,Textile Testing Instrument, Leather shoes Test Equipment, Universal Testing instruments, Continue its advanced design technology and concept, excellent technology of producing and outstanding system of quality management, Tony Instruments has achieved good repute in the fields of textile testing equipments, toy testing equipments, furniture testing and other measurement test equipments. Our long-term partners include the world's two largest inspection companies SGS and TUV.

We produce equipments in line with international market testing standards, meanwhile, we provide customers with complete solutions for laboratory testing.

- Design program for laboratory

- Provision of all testing machines and consumables

- Installation and training

- Maintenance plan service

- Professional calibration and measure services

Some of our important customers, include:

SGS in France, SGS in Vietnam, SGS in China, SGS in Korea, Intertek in China, SAT in China, BACL in Shenzhen, NSF in Shanghai, ITS, BV, TUV and etc.

Sincerely administration make Tony sales network extend all over the world. Up to day Tony products spread to countrywide users. In overseas, we have customers from Vietnam, Thailand, Indonesia, Europe, Iran, Pakistan, USA, Canada, Mexico, Argentina and etc.

Our Testing machines are widely used in Textile, Toys, Furniture, packaging, footwear, leather products, environment, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields.