BT50 Spindle Type Ultrasonic Assisted Milling System For Zirconia And Alumina

BT50 Spindle Type Ultrasonic Assisted Milling System For Zirconia And Alumina

Description:

Ultrasonic assisted machining is an advanced technology used to improve machining process, especially for hard and brittle materials. Ultrasonic assisted machining realizes accurate finishing and maximum chip removal in the milling process. Milling is to fix the blank, with high-speed rotary milling cutter on the blank, cut the shape and characteristics. Conventional milling is mostly used for simple profile festures such as profile features such as profile and groove. CNC milling machines can process complex shapes and features.

Introduction:

In the process of Ultrasonic drilling, material is removed by micro-chipping or erosion with abrasive particles. The tool is oscillated by a piezoelectric transducer and an electric oscillator at a frequency of about 20 kHz. The tool forces the abrasive grits, in the gap between the tool and the workpiece, to impact normally on the work surface, thereby machining the work surface.

During one strike, the tool moves down from its most upper position with a starting speed at zero, and speeds up to reach the maximum speed at the mean position. Then the tool slows down its speed and eventually reaches zero again at the lowest position. When the grit size is close to the mean position, the tool hits the grit with its full speed.

The smaller the grit size, lesser the momentum it receives from the tool. As the tool continues to move downwards, the force acting on larger grits increases rapidly, therefore some of the grits may be fractured. v Eventually, the tool comes to the end of its strike and grits with size larger than the minimum gap will penetrate into the tool and work surface to different extents.

Specification:

Advantage:

1. It overcomes the disadvantage that some special materials are not easy to be processed;

2. Improved processing accuracy, shortened processing time and improved efficiency.

Application:

Hangzhou Altrasonic Technology Co., Ltd

Located in Hangzhou, China, was found in 2010. Altrasonic has many years' experiences in the business of industrial ultrasonic components and ultrasonic devices in China. We use this experience and experise to provide only the best ultrasonic devices and components based on the competitive price.

Altrasonic equipment focused on the r&d of high power ultrasound applications, Altrasonic has absolute leading
core technology, the most stable and mature manufacturing technology, rich experience, can provide direct
ultrasonic application scheme demonstrate, structure design, system configuration and related parts production.

Altrasonic equipment cooperated with the key graphene manufacturers, applied the ultrasound equipment in
graphene preparation process of industrialization firstly, and make the ultrasonic be a good supporting to the large-scale preparation of the high quality and low cost graphene materials.

Our company mission:Ultrasonic Technology makes life easier.

WHY CHOOSE ALTRASONIC ?

• OVERSEA SERVICE TEAM. We now have agents in India, Austrilia, Indonesia, Singapore, Türkiye, Malaysia, Germany, and other country still being discussing.

• Innovation. Altrasonic R&D and marketing staffs to constantly explore new applications in the field of ultrasound, and the importance of team spirit of cooperation.

• Half the price, double the value. Every product reach you have been test in our company three times, and with 72 hours continous working, to confirm it is well before you get it. Also we always learn from foreign company, to
upgrade our products.

• Good components. Ceramic mainly imported from German, and using the superior quality aluminum, titanium raw materials.

• Individual Customize. We can customize products according to your requirements, Also supply OEM service.

Customize ultrasonic solution for different applications.