Product Details
YTWL_CA100F Electrical Speed Limiter with Ethiopia Standard Road
Speed Gonorver
1. Speed Limiter GPRS requirement
- GPRS Of speed limiter shall have a minimum of Multi-slot Class 8
(4Rx, 1Tx, 5 slot Max.)
- GPRS Of speed limiter shall Support at minimum four coding schemes
(CS-1, CS2, CS-3 and CS-4) download speed at least speed 85.6kbps
upload speed is at least 21.4kbps
- Positioning Accuracy of GPS shall be Less than 5 meters at 20 RMS.
- GSM Frequency of the speed limiter GPS shall be based on national
telecommunication requirement
2 Product Specifications
Color | Black | Application | free android and IOS app |
Input Fuse | 5A | CPU | TI:MSP430F5419(100MHz) |
Battery | Lithium battery :400mA( working time is about 3.5 hours) | Warranty | 2 years |
Item Name | Top selling shine | Function | camera gps fleet tracker |
Working Temperature | Anna Shi | MOQ | 5 Pieces |
Recording and tracking | - The recorder shall incorporate a combination of an onboard and
off-board mechanism for recording and storing the speed of the
vehicle.
- The speed shall be recorded in Km/h at not more than five seconds
interval.
- The retrieved data shall clearly and in an unambiguous manner
display the date (dd Imm Iyyyy) of recording.
- Each entry shall be time related (either 24 hour or 12 hour
format).
- Each entry shall capture global position coordinates.
- The recorded data shall be in the same format for both the onboard
and off board storage Systems.
- Memory capacity of the speed limiter device shall have a minimum
capacity of saving 5,000 blind data
| GPS Module | GPS chip set: SiRF Star III Frequency: L1, 1575.42 MHz Number of Channel: 20 Reacquisition: 0.1 sec, average Hot boot: 2 sec., average Warm boot: 38 sec., average Cold boot: 44 sec., average Altitude limit: 18000 m Velocity limit: 515 m/s |
TESTS | Five samples of speed limiter device shall be provided - four
samples for the performance and endurance test described in clause 8.3 and 8.4 and one sample as fitted on the vehicle for carrying out.the tests
prescribed in clause 8.5. In the case of add-on or on-board system
built in the vehicle, the involved system and its components should
be provided separately for the performance and endurance tests | Input I/O | 8 I/O input/output Port 1 main power check 1 port use to check the engine ( ACC check) 1 port use to SOS 1 analog Input port( Fuel sensor) 1 Output port ( Car engine control ) 3 Extend ports ( Input/Output control by software) |
3. Speed Limiter Requirements
YTWL_CA100F Electrical Speed Limiter with Ethiopia Standard Road
Speed Gonorver
- The speed limiter function or road speed limiter shall be
EMCcompatible or shall have Anti-Jammer mechanism;
- Speed limiter devices shall be so constructed that the vehicle may
not be accelerated by the operation of the acceleration devices,
such as the accelerator pedal, when the vehicle is running at its
set speed;
- The speed limiter function or the speed limiter device shall allow
normal accelerator control for the purpose of gear changing;
- Speed limiter device shall be so designed, constructed and
assembled and fitted to the vehicle to make it maximum tamper proof
and fail safe, against various factors such as disconnection /
failure of various components e.g. power supply, speed sensor,
mechanical actuator system, linkages etc. or any unauthorized
modification and adjustment to the system; - Speed limiter devices shall be designed, constructed, assembled and
fitted to the vehicle that it will perform satisfactorily, despite
the vibrations and temperature to which it may be subjected;
- GSM Frequency of the speed limiter GPS shall be based on national
telecommunication requirement.
YTWL_CA100F Electrical Speed Limiter with Ethiopia Standard Road
Speed Gonorver
- The speed limiter device systems shall be "failsafe" in such a way
that if the plug/s to the electronic controller is/are removed,
power is disconnected or if the speed signal and/or wire is
disconnected the vehicle shall automatically, default to a limp
mode
or the engine shall stall or return to idle or, at least, and thus
shall not be able to be driven in excess of thirty kilometers per
hour. (30km/h) ; - The speed limiter function shall be independent of the condition or
soundness of the speedometer ;
- When the vehicle, running at its set speed and with the driver's
accelerator at its position of maximum travel, is subject to an
accelerating force due to a down gradient,the limiter shall control
speed by restricting the engine power to the limiter's minimum
engine power control setting; - The input speed signal shall be obtained from global navigating
system (GNS) or speedometer vehicle speed signal or a converted
speed signal from vehicle gearbox or from other separately
installed sensor as deemed appropriate.
4. Technical Parameters:
YTWL_CA100F Electrical Speed Limiter with Ethiopia Standard Road
Speed Gonorver
Item | Parameters |
Overall Size | 20.0 X 9.2 X 4.5 CM |
Host Net Weight | 0.4 KG |
Processing chip | STC |
Speed Limiting Zone | 20-200 Km/H |
Speed Limiting Deviation | ±5Km/H |
Mechanical Bearing Capacity | 400N |
Working Voltage | 9-36 V |
Rated Power Consumption | <0.3 W |
Working Current | <60 mA |
5 Application Field:
- For large vehicle management and dispatching system ;
- For tour bus and passenger car management ;
- For logistics vehicle monitoring and management ;
- For tank truck monitoring and management.
- For Dangerous goods transportation
Company Profile
shenzhen CarTracker Technology Co., Ltd was founded in 2009,it is
one of the most professional manufacturers for gps tracker and
mobile DVR product.Our company is located in Shenzhen
city,Guangdong province,China.At present our GPS Tracker products
are mainly exported to Southeast Asia,Africa,South America,The
Middle East ,Europe and so on.
Our main products are Car GPS Tracker,Personal GPS Tracker,large
battery GPS Tracker and 3G mobile DVR.Every year we develop new
products to meet customer requirements.and they are certified by
CE,ROHS,FCC and 3C certification bodies.
We have a Research and Development team of more than twenty
engineers. Most of them have a master's degree and 12 engineers
have more than 8 years work experience in the GPS Industry.we also
have a group of professional sales and after sales team. they will
provide after-sales and pre-sales technical support for you.
Our factory is located in Cuishan industrial area,we have about
2000 square meters of building area and more 200 production
staff.they are mainly responsible for gps product
production,testing and quality control.our monthly output is more
20000pieces.the factory has passed ISO9001,ISO14000 Certification.
Welcome to visit our factory and we look forward to the opportunity
to cooperate.