RF Remote Control Transmitter Rogers 4003C High Frequency PCB Board In 0.79mm
Brand Name:XCE
Certification:CE,ROHS, FCC,ISO9008,SGS,UL
Model Number:XCEM
Minimum Order Quantity:1pcs
Delivery Time:5-10 days
Payment Terms:T/T,Western union
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
Room 403 Block A,Huafeng SOHO Creative World Hangcheng Industrial Zone Qianjin 2nd Road,Xixiang Baoan Shenzhen,China
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
RF Remote Control Transmitter Rogers 4003C High Frequency PCB Board In 0.79mm Used PCB Board
Quick detail:
| Origin:China | Special: High frequency pcb |
| Layer:4 | Thickness:0.79mm |
| Surface: ENIG | Hole:0.2 |
Features:
RF Remote Control Transmitter Rogers 4003C High Frequency PCB Board
In 0.79mm Used PCB Board,
1. Rogers pcb multilayer pcb with high frequency can improvide the
products quality ,with high techolonogy treatment improve the life
cycle of the products .Immersion gold surface finish make the pcb
's conductive performance enhancements. Multilayer pcb design ,the
precision of the pcb improves much more better . Low dielectric : 3
dielectric conductivity much more precision .
Specification:
RF Remote Control Transmitter Rogers 4003C High Frequency PCB Board In 0.79mm Used PCB Board
High frequency pcb high-performance insulating material for microwave, radio frequency (RF) and high-speed digital signal processing (DSP) market with PTFE/type woven glass fiber fabric sheet.This material can be applied to LNAs LNBs, PCS/PCN antenna system, global positioning system (GPS) and UMTS antenna system,And the power amplifier, passive components, collision avoidance radar system, aviation help guide remote control technology and system of the phased array radar.
High frequency materials are UL 94V-0 rated for active devices and high power RF designs.
High-frequency circuit board includes a hollow core plate provided with grooves and glue to flow through the upper and lower surfaces of the CCL on the core plate, the upper opening of the hollow groove and a lower opening edge with a wall.
Typical Applications:
- Space Saving Circuitry
- Patch Antennas
- Satellite Communications Systems
- Power Amplifiers
- Aircraft Collision Avoidance Systems
- Ground Radar Warning Systems
- Datalink on cable systems
- Remote meter readers
- Power backplanes
- LMDS and wireless broadband
- Base station infrastructure
System Printed Board High Frequency Rogers PCB Board Rogers high frequency pcb widely used in the area of high technologies like communication device,Electronics,Aerospace,Military industry and so on. we have accumulated abandunt experiences in the line of high frequency microwave business for which widely apply to power divider,combiner,power amplifier,line amplifier,base station,RF antena,4G antena etc.
We have sufficient rogers material raw as follow:RO4003C,RO4350B,RO4360,RO4533,RO4535,RO4730,RO4232,RO4233,RO3003,RO3006,RO3010,RO3035,RO3203,RO3206,RO3210,RO3730,RO5780,RO5880,RO6002,RO3202,RO6006,Frequently-used is 4003C,4350B,5880
So we can do pcb circuit board with your detail requirements in the case of you send us gerber files or any other files
Parameter:
| o | Item | Data |
| 1 | Layer: | 1 to 24 layers |
| 2 | Material type: | FR-4, CEM-1, CEM-3, High TG, FR4 Halogen Free, Rogers |
| 3 | Board thickness: | 0.20mm to 3.4mm |
| 4 | Copper thickness: | 0.5 OZ to 4 OZ |
| 5 | Copper thickness in hole: | >25.0 um (>1mil) |
| 6 | Max. Board Size: | (580mm×1200mm) |
| 7 | Min. Drilled Hole Size: | 4mil(0.1mm) |
| 8 | Min. Line Width: | 3mil (0.075mm) |
| 9 | Min. Line Spacing: | 3mil (0.075mm) |
| 10 | Surface finishing: | HASL / HASL lead free, HAL, Chemical tin, Chemical Gold, Immersion Silver/Gold, OSP, Gold plating |
| 11 | Solder Mask Color: | Green/Yellow/Black/White/Red/Blue |
| 12 | Shape tolerance: | ±0.13 |
| 13 | Hole tolerance: | PTH: ±0.076 NPTH: ±0.05 |
| 14 | Package: | Inner packing: Vacuum packing / Plastic bag,Outer packing: Standard carton packing |
| 15 | Certificate: | UL,SGS,ISO 9001:2008 |
| 16 | Special requirements: | Buried and blind vias+controlled impedance +BGA |
| 17 | Profiling: | Punching, Routing, V-CUT, Beveling |
Generally speaking, a high frequency can be defined as frequencies
above 1GHz high frequency circuit board substrate is currently used
in fluorine deserves more media
Substrates, such as polytetrafluoroethylene (PTFE), usually known
as Teflon, usually used in 5GHz or more. Another use FR-4 or
PPO substrate, the product can be used between 1GHz ~ 10GHz, three
high-frequency properties of the substrate are compared below.
Epoxy resins used in the present stage, PPO resin and a
fluorine-based resin three categories of high-frequency board
material, an epoxy resin into
The cheapest and the most expensive fluorine-based resin; and to
the dielectric constant and dielectric loss, water absorption and
frequency characteristics to consider, a fluorine-based resin
Best, epoxy poor. When the frequency of product applications higher
than 10GHz, only fluorine-based resin boards to apply. Apparent
Easy to see, a fluorine-based resin substrate high-frequency
performance is much higher than other substrates, but its
shortcomings addition to the high cost of the difference between
the outer rigid and thermal expansion
Expansion coefficient is large. For polytetrafluoroethylene (PTFE),
the performance improvement with a large number of inorganic
materials (such as silicon dioxide, SiO2)
Glass cloth as reinforcing filler to improve the rigidity of the
substrate and reduce its thermal expansion. Further, because of
polytetrafluoroethylene resin itself
Inert molecules, resulting in not easy to combine with the copper
foil is poor and therefore more need to combine with a special
surface copper foil surface treatment. Approach
On a Teflon surface chemical etching or plasma etching, increasing
the surface roughness of the copper foil or polytetrafluoroethylene
Terpene resins increase between one adherent layer to improve
adhesion, but may affect the performance of the media, the whole
fluorine-based high-frequency circuit group
Development board, the need for raw materials suppliers, research
institutes, equipment suppliers, PCB manufacturers and
communications products manufacturers, etc.
Multifaceted cooperation, in order to keep up with high-frequency
circuit board in this rapidly developing field.
PrePreg Material
| Parameter | Value |
| Specific gravity/density | 1.850 g/cm3 (3,118 lb/cu yd) |
| Water absorption | −0.125 in < 0.10% |
| Temperature index | 140 °C (284 °F) |
| Thermal conductivity, through-plane | 0.29 W/(m·K), 0.343 W/(m·K) |
| Thermal conductivity, in-plane | 0.81 W/(m·K), 1.059 W/(m·K) |
| Rockwell hardness | 110 M scale |
| Bond strength | > 1,000 kg (2,200 lb) |
| Flexural strength (A; 0.125 in) - LW | > 440 MPa (64,000 psi) |
| Flexural strength (A; 0.125 in) - CW | > 345 MPa (50,000 psi) |
| Tensile strength (0.125 in) LW | > 310 MPa (45,000 psi) |
| Izod impact strength - LW | > 54 J/m (10 ft·lb/in) |
| Izod impact strength - CW | > 44 J/m (8 ft·lb/in) |
| Compressive strength - flatwise | > 415 MPa (60,200 psi) |
| Dielectric breakdown (A) | > 50 kV |
| Dielectric breakdown (D48/50) | > 50 kV |
| Dielectric strength | 20 MV/m |
| Relative permittivity (A) | 4.8 |
| Relative permittivity (D24/23) | 4.8 |
| Dissipation factor (A) | 0.017 |
| Dissipation factor (D24/23) | 0.018 |
| Dielectric constant permittivity | 4.70 max., 4.35 @ 500 MHz, 4.34 @ 1 GHz |
| Glass transition temperature | Can vary, but is over 120 °C |
| Young's modulus - LW | 3.5×106 psi (24 GPa) |
| Young's modulus - CW | 3.0×106 psi (21 GPa) |
| Coefficient of thermal expansion - x-axis | 1.4×10−5 K−1 |
| Coefficient of thermal expansion - y-axis | 1.2×10−5 K−1 |
| Coefficient of thermal expansion - z-axis | 7.0×10−5 K−1 |
| Poisson's ratio - LW | 0.136 |
| Poisson's ratio - CW | 0.118 |
| LW sound speed | 3602 m/s |
| SW sound speed | 3369 m/s |
| LW Acoustic impedance | 6.64 MRayl |
Rogers material in stock:
| Brand | Model | Thickness(mm) | DK(ER) |
| F4B | F4B | 0.38 | 2.2 |
| F4B | 0.55 | 2.23 | |
| F4B | 0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.0 | 2.65 | |
| F4Bk | 0.8,1.5 | 2.65 | |
| F4B | 0.8 | 3.5 | |
| FE=F4BM | 1 | 2.2 | |
| Rogers | RO4003 | 0.254 0.508,0.813,1.524 | 3.38 |
| RO4350 | 0.254 0.508,0.762,1.524 | 3.5 | |
| RO5880 | 0.254.0.508.0.762 | 2.2 | |
| RO3003 | 0.127,0.508,0.762,1.524 | 3 | |
| RO3010 | 0.635 | 10.2 | |
| RO3206 | 0.635MM | 10.2 | |
| R03035 | 0.508MM | 3.5 | |
| RO6010 | 0.635MM, 1,27MM | 10.2 |
Competitive Advantage:
1) With UL,ROHS,ISO,IPC
2).Lead time:3-10 working days
3)Competitive price best quality
4).Rich 20 years experience in High Tg Multilayer PCB .
What Information customer need to provide for quotation ?
1. PCB Gerber files ,protel,powerpcb,Autocad,etc.
2. BOM list for PCB assembly.
3. Send us your sample PCB or PCBA.
4. OEM is acceptable.
Company Service:
24 hours quick sample is avaliable here.
reply Customer's any enquiry within 3 hours;
Blind buried hole ,crossed blind hole can be done
24 hours Engineering Gerber files treatment.
24 hours English Engineering Questions Confirmation by E-mail.
Supply the best project fit for production customized
RF Remote Control Transmitter Rogers 4003C High Frequency PCB Board In 0.79mm
Inquiry Cart
0