2 Layer High Frequency PCB fabrication With Immersion Tin Finished Surface
Brand Name:XCE
Certification:CE,ROHS, FCC,ISO9008,SGS,UL
Model Number:XCEM
Minimum Order Quantity:1pcs
Delivery Time:5-10 days
Payment Terms:T/T,Western union
Contact Now
Add to Cart
Site Member
Location:
Shenzhen Guangdong China
Address:
Room 403 Block A,Huafeng SOHO Creative World Hangcheng Industrial Zone Qianjin 2nd Road,Xixiang Baoan Shenzhen,China
Supplier`s last login times:
within 27 hours
Product Details
Company Profile
Product Details
2 Layer High Frequency PCB fabrication With Immersion Tin Finished
Surface
Typical Applications:
High Frequency BGA PCB Board Testing Electronic
Antenna Radio FM Rogers 3003 High Frequency PCB With Half Hole In
0.79mm Thickness
- Space Saving Circuitry
- Patch Antennas
- Satellite Communications Systems
- Power Amplifiers
- Aircraft Collision Avoidance Systems
- Ground Radar Warning Systems
- Datalink on cable systems
- Remote meter readers
- Power backplanes
- LMDS and wireless broadband
- Base station infrastructure
Electronic equipment is the development trend of high-frequency,
especially in the wireless network, the growing development of
satellite communications, information products to high
Speed and high-frequency, and communications products to the
capacity of large-speed wireless transmission of voice, video and
data standardization.
Of the new generation products need high-frequency substrate,
satellite systems, mobile phone base stations and other
communications products must be used to receive high-frequency
circuit
Board, in the next few years will inevitably rapid development of
high-frequency substrate will be a lot of demand.
The basic characteristics of high-frequency substrate material
requirements are the following:
(1) the dielectric constant (Dk) must be small and very stable,
usually the smaller the better the signal transmission rate and the
dielectric constant
Of the square root is inversely proportional to high dielectric
constant likely to cause signal transmission delay.
(2) Dielectric loss (Df) must be small, which mainly affects the
quality of signal transmission, the smaller the dielectric loss so
that the signal loss is also smaller.
(3) and copper foil thermal expansion coefficient as far as
possible, because inconsistencies in the change in the cold and
heat caused by copper foil separation.
(4) low water absorption, high water absorption will be affected in
the damp when the dielectric constant and dielectric loss.
(5) Other heat resistance, chemical resistance, impact strength,
peel strength, etc. must also be good.
Advantage
2 Layer High Frequency PCB With Immersion Tin Finished Surface
Rogers 5880 pcb substrate superiority
1.Sufficient high frequency material raw
2. PCB Have the comprehensive quality control system
3. PCB good price
4. PCB quick turn delivery time from 48hours.
5. PCB certification(ISO/UL E354810/RoHS)
6. 12 years experience in exporting service
7. PCB is no MOQ/MOV.
8. PCB is high quality.Strict through theAOI(Automated Optical
Inspection),QA/QC,fly porbe ,Etesting
Parameter:
| o | Item | Data |
| 1 | Layer: | 1 to 24 layers |
| 2 | Material type: | FR-4, CEM-1, CEM-3, High TG, FR4 Halogen Free, Rogers |
| 3 | Board thickness: | 0.20mm to 3.4mm |
| 4 | Copper thickness: | 0.5 OZ to 4 OZ |
| 5 | Copper thickness in hole: | >25.0 um (>1mil) |
| 6 | Max. Board Size: | (580mm×1200mm) |
| 7 | Min. Drilled Hole Size: | 4mil(0.1mm) |
| 8 | Min. Line Width: | 3mil (0.075mm) |
| 9 | Min. Line Spacing: | 3mil (0.075mm) |
| 10 | Surface finishing: | HASL / HASL lead free, HAL, Chemical tin, Chemical Gold, Immersion Silver/Gold, OSP, Gold plating |
| 11 | Solder Mask Color: | Green/Yellow/Black/White/Red/Blue |
| 12 | Shape tolerance: | ±0.13 |
| 13 | Hole tolerance: | PTH: ±0.076 NPTH: ±0.05 |
| 14 | Package: | Inner packing: Vacuum packing / Plastic bag,Outer packing: Standard carton packing |
| 15 | Certificate: | UL,SGS,ISO 9001:2008 |
| 16 | Special requirements: | Buried and blind vias+controlled impedance +BGA |
| 17 | Profiling: | Punching, Routing, V-CUT, Beveling |
Rogers material in stock:
| Brand | Model | Thickness(mm) | DK(ER) |
| F4B | F4B | 0.38 | 2.2 |
| F4B | 0.55 | 2.23 | |
| F4B | 0.225,0.3,0.5,08,1,1.2,1.5,2,2.5,3.0 | 2.65 | |
| F4Bk | 0.8,1.5 | 2.65 | |
| F4B | 0.8 | 3.5 | |
| FE=F4BM | 1 | 2.2 | |
| Rogers | RO4003 | 0.254 0.508,0.813,1.524 | 3.38 |
| RO4350 | 0.254 0.508,0.762,1.524 | 3.5 | |
| RO5880 | 0.254.0.508.0.762 | 2.2 | |
| RO3003 | 0.127,0.508,0.762,1.524 | 3 | |
| RO3010 | 0.635 | 10.2 | |
| RO3206 | 0.635MM | 10.2 | |
| R03035 | 0.508MM | 3.5 | |
| RO6010 | 0.635MM, 1,27MM | 10.2 |
Competitive Advantage:
1) With UL,ROHS,ISO,IPC
2).Lead time:3-10 working days
3)Competitive price best quality
4).Rich 20 years experience in High Tg Multilayer PCB .
What Information customer need to provide for quotation ?
1. PCB Gerber files ,protel,powerpcb,Autocad,etc.
2. BOM list for PCB assembly.
3. Send us your sample PCB or PCBA.
4. OEM is acceptable.
Q:Are you Factory or Trade company?
A:We are factory manufacturer,welcome to visit our factory.
Q:What kind of PCB file format can you accept for production?
A:Gerber, PROTEL 99SE, PROTEL DXP, POWER PCB
Q:Can you accept copy board?
A:Yes,if you have pcb sample,can send to us,not only for PCB
board,but also for PCBA,we can accept copy board
Q:How about your factory production capacity?
A:FR4:2000000Sqms High Frequency board:10000Sqms
2 Layer High Frequency PCB fabrication With Immersion Tin Finished Surface
Inquiry Cart
0