11kv 33kv Power Distribution Transformer Electric Steel Poles With Cross Arm

11kv 33kv power distribution transformer electric Steel Utility Pole with corss arm

Introduction

Specification

1. ISO9001:2008 Certificate
2. 20 years experience
3. Material Q235,Q345 ASTM
4. Hot dip galvanized

5. OEM is welcome.

6. Best quality with reasonable price!

7. The voltage grade is 500kV.

8. The monthly production capacity is 3000 Metric tons.

9. The largest company of eastern region in China to design and manufacture the steel tower pole and related products.

10. A strong teemwork of tecknological reserch and advanced progress.
11. Mainly exports to southeast Asia, Middle East and other countries and regions.

Scope of Application

The product is mainly use in small power transmission line, which suitable for Small whole, ceiling-mounted steel pole tower installation transmission line project; Generally it only applies to erect on the flat terrain such as plain and side of the road, and much rely on heavy lifting machines for installation.

Straight Pole is mainly use to the “straight” part of the power line, it usually only bear with the weight of the wire, the endured wire icing and wind pressure.

Tension pole is mainly use in Load-bearing towers; it would be set between few Straight towers. Since the power line discounted and tower collapsed, it would limit the fault segment between the two Tension towers in the case of tension imbalance on both sides, which ease of construction, maintenance.

Angle Pole is mainly installed in the around corner of the power line, so the structure of it has to consider the requirement of undertake imbalance tension; According to the angle degree and strength of tower design, straight line angle tower is mainly use in the small degree corner of the power line, and Tension Angle Tower is mainly used for larger degree corner of the power line.

Terminal Pole is mainly use in the beginning or end of the power transmission line, it usually set as the first tower of extension line of substation; because it could undertake great imbalance tension, so sometime it also use in the large degree of power line corner.

Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .

Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on

We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on

To assure our products qualified ,we take steps as follows :

1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .

2. Introducing ISO management ,We are awared ISO 9001:2008 certificate . .

3. Lofting and design software :We have transmisson power pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly .

4. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore every shipment .

We are always persisting in horzontal cooperation with domestic senior project institute and technical colleges .The enterprise also has an highly qualified team working at R&D ,manufacure ,QC ,aftersales service and other important positions .