SWA Electrical Wires And Cables Aluminum Alloy Cable 0.6/1/10 Xlpe Sheathed

SWA multi cores aluminum alloy cable 0.6/1kv xlpe sheathed

Specifications:

Standard:
IEC 60502.1
GB/T 12706.1

Structure: aluminium alloy conductor/XLPE insulation/interlocked aluminum armour
1. For single conductor cables, the bonding conductor is applied concentrically
around the phase conductor.
2. For multi conductor cables, the conductor consists of XLPE insulated phase cores and one bare bonding core.

Examples:

1: Rated voltage is 0.6/1kV, copper-core flame-retardant(105°C)PVC insulated and sheathed, steel tape armored, 3+2 type, main core section is 185mm2 and that of neutral core is 95mm2, such power cable can be represented by: BW105 -VV22 0.6/1kV 3 X 185+2 x 95

2: Rated voltage is 0.6/1kV, aluminum core PVC insulated and sheathed, 3+1 type, main core section is 50mm2 and that of neutral core is 25mm2, such power cable can be represented by: VLV 0.6/1kV 3 X 50+1 X 25

3: Rated voltage is 0.6/1kV,aluminum core flame-retardant PVC (105°C)insulated and PVC sheathed power cable with main core section to be 50mm2 and that of neutral core is 25mm2, it can be represented by: BW105-VLV 0.6/1kV 3 X 50+1 X 25

4: Rated voltage is 0.6/1kV,aluminum core flame-retardant PVC (135°C)insulated and PVC sheathed power cable with main core section to be 50mm2 and that of neutral core is 25mm2, it can be represented by:BW135-VLV 0.6/1kV 3 X 50+1 x 25

Packing

Steel reels of corrugated, outside wrapped by fuming wood; Packing length according to customer' requirement

Estbilsed in 1989,Jiangsu Milky Way Steel Poles is located in Wuxi,East of China ,near one of the largest sea port of China ,Shanghai,Port .

Our Products have been widely used in the power transmsion ,signal transmission and ligting for street ,road ,square ,palaestra.and so on

We have plenty of export experience . Since our first overseas order from Pakstan in 1991 of 132 KV transmission poels ,our products have been deliveried to more than 70 contries and areas ,including America,Australia ,Russia ,Genmery ,Span,Philippines ,Malaysia and so on

To assure our products qualified ,we take steps as follows :

1. Management team : We have employ the foreign export to take chaege of the overall managemnt ,especailly the technical managemnt and quality management .

2. Introducing ISO management ,We are awared ISO 9001:2008 certificate . .

3. Lofting and design software :We have transmisson power pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly .

4. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore every shipment .

We are always persisting in horzontal cooperation with domestic senior project institute and technical colleges .The enterprise also has an highly qualified team working at R&D ,manufacure ,QC ,aftersales service and other important positions .