Thick Galvanized Steel Roof Panel Roll Forming Machine with Chain Driving System

Thick Galvanized Steel Roof Panel Roll Forming Equipment with Chain Driving System


Machine List

Technological process

Uncoiling—Feedingwithguide——Rollforming—Cutting—Products collecting

Un-coiler:

5 tons passive decoiler

Coil inner Diameter: ￠508-610mm
Max out diameter of the coil: ￠1500mm
Max Coil Width: 1250mm

Roll forming machine:

Roll Forming Machine: RF-RP

Rolling Speed : 10-12m/min(cutting time is not include)

Steel sheet Thickness: 0.3-0.8mm color painted sheets

Machine should be compatible for Aluminium , PPGI , PPGL , etc.

Control System: PLC

Roller Stations: about 14 stations up and 14 stations down

Roller Material : 45# forge steel, coated with chrome

Shaft Material and DIA: ￠75mm,material is 45# forge steel, Chrome with quenching

Main Motor Power: 7.5kw

Hydraulic Pressure: 12Mpa

Tolerance: +1.5mm

Power supplier:380V, 50HZ,3 phase

Way Of Drive:1.2 inch single chain

Color Of The Machine :blue

The size of the forming machine:7000*1500*1000mm

Machine weight: about 8 tons

Cutting:
(1) Cutting motion: The main machine stops and then cut automatically. After cutting, the main machine re-starts automatically.
(2) Material of blade: CR12 with heat treatment
(3) Length measuring: Automatically
(4) The cutting thickness: 0.3- 0.8mm
(5) Hydraulic Station Power: 4 KW

Hydraulic Station

It is controlled by wheel oil pump. After filling the hydraulic oil into
the hydraulic oil tank ,the pump drive the cutter machine to begin the
cutting job.
Components: The system includes a set of hydraulic tank, a set of hydraulic
oil pump, two hydraulic pipes. and two sets of electromagnetism valves.

Out table:

Size:4000*1350*1000mm

Control Box:

Electrical control system part,
t-size:9.0000pt;mso-font-kerning:1.0000pt;" >00mm

(1) Power supplier: 380V, 50 Hz, 3Phase (adjusted with the requestment)
(2) length & quantity measurement automatically;
(3) length & quantity controlled by PLC,
(4) Length inaccuracy can be amended easily.
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)

Machine pictures

The main products of factory is light gauge framing machine, pre-painted steel forming machine, Glazed Tile forming machine, Automatical C/Z Purlin forming machine, Floor Deck forming machine, Guardrail forming machine, Down Pipe forming machine, The whole carriage plate for car beam unit , Steel storage unit, etc. Totally it has 100 types in 20 serious. The products are widely used in warehouse, factory buildings, supermarket, Nursing homes, villas, residential, greenhouse and other construction projects. Our factory can meet the construction enterprises, automobile industry, iron and steel production enterprises’s growing demand.