

Add to Cart
2018 Best Seller 3 in 1 Vertical IPL SHR&E-light hair removal equipment&machine
SHR, leading hair removal Technology:
SHR permanently destroys hair follicle by using low fluence,
repetitive light pulses, targeting the susceptible hair follicles.
Compared to IPL and Laser light-based hair removal systems, which
fire around 2-4 high-powered shots into each hair follicle, SHR
fires a minimum of 20-30 shots into each follicle. This can be
described as the difference between the speed of an automatic
machine gun using SHR, to a single rifle shot using traditional
IPL. Additionally, the revolutionary “ in-motion ” technology
gradually and transiently heats up the targeted hair follicles,
making this treatment virtually painless, especially appreciated by
customer with darker , thicker hair on sensitive areas like back .
Advantages of SHR hair removal machine FMS-1:
1.Germany imported xenon lamp, promise 500,000 shots long life
time.
2.Germany imported customized medical handle pipe, more
professional, more durable.Pure sapphire crystal ultilized in the
device to let the light illuminate skin well to get best result.
3. Wind, water and semiconductor 3 strong cooling system, make sure
the machine 24 hours nonstop continue working.
4. High power booster pump, which can output 6.5L water per min,
ensure good water circulation.
5. 8L stainless big water tank, ensure the machine keep long
working time.
6. 2 big japan imported copper radiator much better heat conduction
than the aluminum ones.
7. 2 copper radiators and 4 big DC fans. Strong wind with lower
noise, very quickly.
8. The crystal can reach -5℃,when the machine is working. Super
strong cooling system has been proved very well.
9. Semiconductor cooling pads: 2 electronic cooling pieces in the
handle to make its temperature reach 0℃ quickly.
Three working modes of SHR hair removal machine FMS-1:
IPL: IPL is a kind of light with high energy and broad wavelength,
within the range from 430 to 1200nm. According to the principle of
IPL photo rejuvenation technology, intense pulsed light with board
spectrum affects pigmentations, broken capillary vessels and hair
follicle.
SHR: Based on IPL, SHR has more advanced technology to remove hair
faster, the In-MOTION OPT technology makes the treatment painless,
effective, less sessions.
E-light: Bipolar Ridio Frequency + IPL + Skin contact cooling. When
the three are united in one treatment , wonderful treatment
experience and results can be expected.
RF: using the exclusive radiofrequency technology and contact cooling system, it can tighten and lift your skin obviously. RF produces heat when the tissue electrical resistance converts the electric current to thermal energy deeper within the dermis.
Treatment of scope SHR hair removal machine FMS-1:
Hair removal: limbs hair, axillary hair, beard,lip hair, etc.
Skin rejuvenation: remove wrinkle, whiten skin, shrink pore, remove
acne, etc.
Speckle removal: freckle, age pigment, sunburn, birthmark, etc.
Cooling system of SHR hair removal machine FMS-1:
Consists if Water + Wind + Semiconductor triple cooling system
1. Booster pump: High power booster pump, which can output 6.5L
water per min,
ensure good water circulation.
2. Water tank: 10L stainless big water tank.
3. Pure copper radiator: 2 large size pure copper radiators, much
better heat exchange
than the Aluminum.
4. DC fans: 4 big power DC fans, strong wind with less noise.
5. Semiconductor cooling pads: 2 semiconductor cooling pieces in
the handle to make its temperature reach low degree quickly.
6. Temperature of Crystal: The crystal can reach -5 ℃when the
machine is working. Super strong cooling system has been proved
very well.
Operating system of SHR hair removal machine FMS-1:
1. 10.4 inch touch screen
2. Multi-language optional
3. Intelligent and humanized operating system
Technical parameters:
Light Source | Intense Pulsed Light |
E-light | 5Mhz |
Wave Length | HR690~1200nm,SR560~1200nm |
Light guide | Crystal light guide |
Control Mode | Touch Control |
Safety Classification | Class I, Type B |
Energy density | IPL mode 10~60J/cm2 ,SHR mode 1~15J/cm2 |
Frequency | 1~10Hz |
Spot size | 16×50mm (HR),8×34mm(SR) |
Spot Temperature | 0-5 Degrees Celsius |
Cooling system | Semiconductor Refrigeration +Water Cooling +Wind Cooling |
Size | length Width Height 470×360×1040mm |
Weight (net weight) | 40kg |
Fuse Specification | Ø5×2515A |
Input Power | 3000W |
Power requirement | AC220V±10% 15A 50HZ , AC110V±10% 30A 60HZ |
1. 3 years warranty with lifetime free service and maintenance.
2. Free training for operation of the equipment in our company, which provided by our specialized training department.
3. On-line services, for example, technical consultancies provided by our skilled technique group concerning any question of the laser equipment, and after-sale maintenance and more.
4. OEM/ODM services are available. We have our own developing and design department and manufacturing line, which ensure your required beauty equipment.
5. Professional after-sale service team, solve all problems in time.
How does SHR work?
It is a revolutionary approach, rather that bombarding your skin
with high amounts of
damaging energy. SHR fires multiple shots but at low Joules, in
doing so it gently heats
the hair follicle to the heat needed and the most you will feel is
warmth and a tingling
sensation, some clients comparing it to a warm massage. SHR also
utilizes In-Motion
technology, where the hand piece is always in motion over the skin.
What is the first step before treatment?
The first step before any treatment is a consultation, at the
consultation we gather
medical & other relevant information to ensure you not only
receive a safe treatment,
but also have all the information needed. Consultation time is 30
minutes and in some
cases a treatment can be conducted after your consultation.
Is SHR suitable for all skin types?
SHR is suitable for all skin types, even tanners, this is
achievable because of the
technology and techniques utilized. Unlike traditional Laser and
IPL, SHR can be had
all year round without having to hide from the sun.
Will SHR work on blonde, red or fine hair?
Like all hair removal, hairs that are dark work the best, however
with SHR there is
generally a better result of up to 50% on blonde, red and fine
hairs and in some cases
more. As we are all unique results will vary from person to person.
How many treatments are needed?
To fully treat the area you may require 3-6 treatments at four week
intervals. A four
week regime is important to maintain so that the SHR treatments get
the hair at its
four week re-growth. Near the end of the treatments 6-8 week
intervals will be needed
to finish off your course.
Is there any pain?
It is absolutely pain free, this is achieved by SHR technology and
In-Motion techniques,
to give you a pain free treatment, including in the most sensitive
areas.
Is this permanent?
SHR is the closest treatment to absolute permanent hair removal.
Unfortunately your
body can produce hormones that can simulate further hair growth
with some people.
After your course of treatments you will have at least 80%-90% of
hair gone, with only
touch up treatments needed 1-2 times a year.
Am I a suitable candidate for Laser Hair Removal?
With the new SHR, almost everyone can enjoy the benefits of laser
hair removal,
however, the overall effectiveness of laser hair removal is
dependent on a combination
of your hair and skin colour. Since the beam of light is attracted
to the pigment in your
hair and your skin, the laser beam will not be able to treat grey
or white hair, as there
is not sufficient pigment in these hair folical. You should
discontinue all tanning activities
for at least 4 weeks prior to treatment to avoid any skin
pigmentation that may take
months to fade.
Are all areas treatable?
Any area of the body where you have unwanted hair may be treated.
For your convenience we have packaged together our most popular
areas together to
make them even more affordable.
Why do I need multiple treatments?
Each of your hair follicles individually goes through different
growth phases at different
times. Since the laser’s beam is attracted to the pigment in your
hair, laser hair removal
only works when your hair is in the “active” growth phase. Any
follicle that does not
contain hair (whether it’s from waxing, plucking, or simply because
the hair is currently
in a different growth phase) will not be destroyed. To make sure
that full results are
achieved, several treatments are required in order to give your
hair follicles time to
cycle through all the growth phases.
Contact
Beijing Nubway S&T Co., Ltd
Justin Cen
Skype: justin2013145
Email:Justin(@)nubwaygroup.com
Phone/WhatsApp:+86 13521050632
Facebook: NUBWAY.JUSTIN