C9200-48P-A Cisco Switch Catalyst 9200 48-Port PoE+ Data Switch Network Advantage
Brand Name:Cisco
Certification:CE
Model Number:C9200-48P-A
Place of Origin:USA
Model:C9200-48P-A
Stacking bandwidth:160 Gbps
Contact Now
Add to Cart
Verified Supplier
Location:
Shanghai Shanghai China
Address:
26Minyi Road, Xinqiao, Songjiang Industrail Zone Shanghai China
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
C9200-48P-A Overview
C9200-48P-A is the Catalyst 9200 48-port PoE+ Data Switch, withNetwork Advantage software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise C it is secure, always on, and IT simplified.
Quick Spec
Table 1 shows the quick spec.
| Model | C9200-48P-A |
| Downlinks total 10/100/1000 or PoE+ copper ports | 48 ports Full PoE+ |
| Uplink configuration | Modular uplink options |
| Default primary AC power supply | PWR-C6-125WAC |
| Fans | FRU redundant |
| Software | Network Advantage |
| Stacking bandwidth | 160 Gbps |
| DRAM | 4 GB |
| Flash | 4 GB |
| Switching capacity | 176 Gbps |
| Forwarding rate | 261.9 Mpps |
| Chassis Dimensions | 1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm |
Supported Products
Table 2 shows the recommended supported products.
| Network modules | |
| Product number | Product description |
| C9200-NM-4G | Catalyst 9200 4 x 1GE Network Module |
| C9200-NM-4X | Catalyst 9200 4 x 10GE Network Module, spare |
| C9200-NM-BLANK | Catalyst 9200 BLANK Network Module |
| StackWise-80 and StackWise-160 Kit and cables | |
| Product number | Product description |
| C9200-STACK-KIT= | C9200 Stack Kit Spare |
| C9200L-STACK-KIT= | C9200L Stack Kit Spare |
| STACK-T4-50CM | 50CM Type 3 Stacking Cable |
| STACK-T4-1M | 1M Type 3 Stacking Cable |
| STACK-T4-3M | 3M Type 3 Stacking Cable |
| Power supplies | |
| Product Number | Product Description |
| PWR-C6-125WAC/2 | 125WAC power supply spare |
Compare to Similar Items
Table 3 shows the comparison.
| Model | Description |
| C9200-48T-A | Catalyst 9200 48-port Data Switch, Network Advantage |
| C9200-48T-E | Catalyst 9200 48-port Data Switch, Network Essentials |
| C9200-48P-A | Catalyst 9200 48-port PoE+ Switch, Network Advantage |
| C9200-48P-E | Catalyst 9200 48-port PoE+ Switch, Network Essentials |
C9200-48P-A Specification
C9200-48P-A Specification | |
| Downlinks total 10/100/1000 or PoE+ copper ports | 48 ports data |
| Uplink configuration | Modular uplink options |
| Default primary AC power supply | PWR-C6-125WAC |
| Fans | FRU redundant |
| Software | Network Advantage |
| Chassis Dimensions | 1.73 x 17.5 x 13.8 in 4.4 x 44.5 x 35.0 cm |
| Virtual Networks | 4 |
| Stacking bandwidth | 160 Gbps |
| Total number of MAC addresses | 32,000 |
| Total number of IPv4 routes (ARP plus learned routes) | 14,000 (10,000 direct routes and 4,000 indirect routes) |
| IPv4 routing entries | 4,000 |
| IPv6 routing entries | 2,000 |
| Multicast routing scale | 1,000 |
| QoS scale entries | 1,000 |
| ACL scale entries | 1,600 |
| Packet buffer per SKU | 6 MB buffers for 24- or 48-port Gigabit Ethernet models |
| Flexible NetFlow (FNF) entries | 16,000 flows on 24- and 48-port Gigabit Ethernet models |
| DRAM | 4 GB |
| Flash | 4 GB |
| VLAN IDs | 4096 |
| Total Switched Virtual Interfaces (SVIs) | 1000 |
| Jumbo frames | 9198 bytes |
| Wireless bandwidth per switch | Up to 48 Gbps on 24-port and 48-port Gigabit Ethernet model |
| Switching capacity | 176 Gbps |
| Forwarding rate | 261.9 Mpps |
| Mean time between failures (hours) | 375,570 |
C9200-48P-A Cisco Switch Catalyst 9200 48-Port PoE+ Data Switch Network Advantage
Inquiry Cart
0