gas station dispener used oil double walled pipeline leakage alarm system
Brand Name:guihe
Certification:CE,ISO ,OTHERS
Model Number:SYW-SL +GH-SL
Minimum Order Quantity:1
Delivery Time:3-5DAYS
Payment Terms:TT/LC/ OTHERS
Contact Now
Add to Cart
Active Member
Location:
Qingdao Shandong China
Address:
tangdaowan road huangdao district qingdao city shandong province china
Supplier`s last login times:
within 39 hours
Product Details
Company Profile
Product Details
Petrol diesel gasoline station SF double walled pipe leakage alarm system leak detector
Product introduction:
GH-SL Pipeline leakage detector is composed of a SYW-SL leakage
detection sensor, GH-SL detecting controller and other related
accessories,.The leakage detector have real-time monitoring
function. It is specially designed for detecting water and oil
between the pipeline interlayer .When leakage occurs between the
pipeline interlayer , the leaked liquid will gravity to the bulk
tank , the SYW-SL sensor who keep in the bulk tank can detect the
leaked liquid and make the signal to GH-SL controller , the
controller get the signal and make the lights and audio alarm
.Users can make a timely response and take related measures to
avoid potential safety hazards and environmental pollution based on
the alarm.
The detector is equipped with switch value output signal ,so it can
realize interlocking control with third-party equipment .
Technical Parameters:
**Detector voltage:220VAC **Sensor voltage :+12VDC
**Alarming mode :audible and visual alarm ** Inspection time:≤1s
**Range of temperature :-40℃～+70℃ **Environment humidity:＜85%
**Output mode:switch value **Cabling mode:Parallel input
**Detector size:300*180*113 ** Number of supported sensors :6
Product Features:
1,Running safety, stability, easy maintenance: sensor device is
composed of liquid float switch, with simple structure and stable
running.
2,High sensitivity: response time is less than one second.
3,Less cost, high efficiency:one leakage detector can take six
leakage
detection sensor, each leakage detection sensor can take four
double-layer pipeline and one manhole well.
4,Simple installation and wide application : it can be easily
installed in a gas station, oil depot and other regions.
5,Relay output port, can make the equipment chain control with a
third party.
6,485 communication port can realize uploading function.
Install Leakage Detection Sensor:
1,Put the Leakage detection sensor vertical installed in the fixed
bolt of manhole well.
2,Connection pipe test ports and detection device ports with oil
conduit,oil conduit need short enough to avoid bending.
3,Connect snorkel to his connection Port.Complete the snorkel
connection,the specific location is : on the manhole well inner
wall of oil tank , directly above 1m and vertical direction.
4,Installation,use and maintenance of detection sensor should also
comply with the product manual,GB3836-2010 explosion-proof
criteria,Design of automotive filling oil and gas,construction
specifications and other national standards. It is only allowed to
make the installation construction who have the qualification of
explosion-proof electrical equipment installation.
Installing GH-SL Leakage Detector:
1,Leakage detector and leakage detection device connection cables
is recommended to use shielded cable 2 * 1.
2,With fixed screws to fix the leakage detector on the wall .
3,Put out the signal cable which contact the sensor in the manhole
well and get through the threading pipe to the control room,
connect the two signal lines to terminals of detector circuit board
(regardless of the positive and negative ), attention :the label of
terminals should correspond to the label of manhole well detecting
sensor.
4,Adjust leakage detector DIP switch : according Annex 1 to keep
the DIP switch shows numerical concur with the enabled leakage
sensor quantity.
5,Open the leakage detector power switch , if no leakage happens ,
all indicator light shows green; when leakage happens, the
corresponding light shows red; at the same time alarm rang ,relay
start working.
6,When Alarm rang, users can turn off the "silence switch",on the
left side of the detector to eliminate voice.
7,In the process of normal use ,Press "Detection button" ,leakage
detector can simulate the penetration function in turn, to test
indicator is normal or not .After the simulation test then return
to normal state.
Qingdao Guihe Measurement & Control Technology Co.,Ltd is professional manufacuture about Gas station/Oil depot equipment . We have more than 13 Years production experience .
Our main produce as : gas station ATG/ automatic tank gauge , management system . double wall pipe leakage detector ,double wall tank leakage detector , hose type tanker truck ATG ,Magnetostrictive probe , touch contorl sonsole , Tank Calibration system/machine, high level alarm , gas alarm ,and others .
we are finding the DISTRIBUTOR in different country , welcome to contact us and talk about it !
gas station dispener used oil double walled pipeline leakage alarm system
Inquiry Cart
0