Add to Cart
SWA Low Voltage PVC Insulated PVC Sheathed Power Cable 0.6/1kV KEMA Certified
LV PVC Power Cable (Low Voltage PVC Insulated PVC Sheathed Power Cable) meets or exceeds the requirements of all international standards like ASTM,IEC,DIN,BS,AS,CSA,NFC,SS,etc. in addition, we also accept OEM service to meet your special request.
Low Voltage PVC Insulated PVC Sheathed Power Cable.
Application:
PVC Insulated and Sheathed Power Cable are suitable to be laid for distribution line with A.C.50HZ and
rated voltage up to 1kV. With the characteristics of stable
capability, advanced technology, broad material resources, low
price, good flexible and easy to lay and maintain.
Property:
1.The long-term permissible operation temperature of the conductor
shall not be higher than 70℃.
2. Conductor maximum short circuit((less than 5 second) temperature
shall not be higher than 160℃.
3. The cable is not limited by drop in level when being laid, and
the environment temperature shall not be lower than 0℃.
4. Perfect chemical stability, resistant against acids, alkalis,
grease and organic solvents, and flame retardance.
5. Light weight, perfect bending properties, installed and
maintained easily and conveniently.
Construction:
0.6/1kV Single Core or Multi Cores, Circular Compacted Al or
Cu/PVC/PVC armoured or Un-Armoured Power Cable.
0.6/1kV PVC Insulated Power Cable | Conductor | Insulation | Armor | Outer Sheath | |||||
Aluminum | Copper | PVC | SW | ST | DST | AW | PVC | PE | |
Cu/PVC/PVC | P | P | --- | --- | --- | --- | P | ||
Cu/PVC/PE | P | P | --- | --- | --- | --- | P | ||
Al/PVC/PVC | P | P | --- | --- | --- | --- | P | ||
Al/PVC/PE | P | P | --- | --- | --- | --- | P | ||
Cu/PVC/STA/PVC | P | P | --- | P | --- | --- | P | ||
Cu/PVC/STA/PE | P | P | --- | P | --- | --- | P | ||
Al/PVC/STA/PVC | P | P | --- | P | --- | --- | P | ||
Al/PVC/STA/PE | P | P | --- | P | --- | --- | P | ||
Cu/PVC/DSTA/PVC | P | P | --- | --- | P | --- | P | ||
Cu/PVC/DSTA/PE | P | P | --- | --- | P | --- | P | ||
Al/PVC/DSTA/PVC | P | P | --- | --- | P | --- | P | ||
Al/PVC/DSTA/PE | P | P | --- | --- | P | --- | P | ||
Cu/PVC/SWA/PVC | P | P | P | --- | --- | --- | P | ||
Cu/PVC/SWA/PE | P | P | P | --- | --- | --- | P | ||
Al/PVC/SWA/PVC | P | P | P | --- | --- | --- | P | ||
Al/PVC/SWA/PE | P | P | P | --- | --- | --- | P | ||
Cu/PVC/AWA/PVC | P | P | --- | --- | --- | P | P | ||
Cu/PVC/AWA/PE | P | P | --- | --- | --- | P | P | ||
Al/PVC/AWA/PVC | P | P | --- | --- | --- | P | P | ||
Al/PVC/AWA/PE | P | P | --- | --- | --- | P | P | ||
Armor material : SW=steel wire, ST=steel tape, DST=double steel tape, AW=aluminum wire |