Product Details
1, Product specification
Basic size information |
Color | white |
Pitch | 1.0mm |
Terminal insulation O.D. | 0.60mm(max) |
Terminal material | phosphor bronze |
Finish terminal | gold-flash |
Position | 30 pins |
Wire range | AWG#30 to #34 |
|
Electrical properties |
Current Rating | 1A AC, DC |
Voltage Rating | 200V AC, DC |
Contact Resistance | 40mΩ Max |
Insulation Resistance | 100mΩ |
Withstanding Voltage | 500V AC/minute |
|
Mechanical properties |
Temperature range | -25℃ to 85 ℃ |
2, Related drawing and report
The below engineering drawing and testing report is for your
reference, it's no doubt that it can help you to get right parts
for your device.
5. Mechanical Performance Test Description | Procedure | Requirement | 5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw connectors at the speed rate of 25±3mm /
minute. | Refer to paragraph 7 | 5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at
the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#30 | 0.8kgf (Min) | AWG#32 | 0.5kgf (Min) | AWG#34 | 0.3kgf (Min) | 5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.50kgf (Max.) | 5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on
the terminal assembled in the housing. | 0.50kgf (Min.) | 5-5 | Pin Retention Force | Apply axial push force at the speed rate of 25±3mm / minute | 0.40kgf (Min.) | 5-6 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per
minute. | Contact Resistance 80mΩ (Max.) | 5-7 | Vibration | Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each
X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) | Appearance No Damage. Contact Resistance 80mΩ (Max.) Discontinuity 1 μsec.(Max.) | 5-8 | Physical Shock | 490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS
C0041/MIL-STD-202 Method 213B Cond. A) |
|
6. Environmental Performance And Others
Test Description | Procedure | Requirement | 6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) | 6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond.
A) | Appearance No Damage. Contact Resistance 80mΩ (Max.) | 6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | 6-4 | Humidity | Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) | Appearance No Damage. Contact Resistance 80mΩ (Max.) Insulation Resistance 10MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 | 6-5 | Temperature Cycling | 5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) | Appearance No Damage. Contact Resistance 80mΩ (Max.) | 6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt
spray from the 5±1% solution at 35±2℃. (Based upon JIS
C0023/MIL-STD-202 Method 101C Cond. B) | 6-7 | SO2 Gas | 24 hours exposure to 50±5ppm. SO2 gas at 40±2℃. | 6-8 | NH3 Gas | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia
solution. |
6-9 | Solderability | Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ | Solder Wetting 95% of immersed area must show no voids, pin holes | 6-10 | Resistance to Soldering Heat | When reflowing Refer to paragraph 8 Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ | Appearance No Damage. |
7. Actuator Insertion/Withdrawal Force [Unit : kgf] Circuits | At Initial | Insertion (Max.) | Withdrawal (Min.) | 20 | 2.60 | 0.60 | 30 | 4.00 | 0.76 |
|
3, The product application scope
This product are widely fixed in household appliance, computer,
telecommunication device. Our parts are accepted by famouse and
international company like TPV, Emerson, Amphenol Corporation,
LuXshare, BYD etc because of its' low defective rate. And the all
products are approved by REACH, UL, RoHS internation standard. Some
parts are halogen free to protect the green world.
4, Our intimate service for you
We can offer you all kind of intimate service like prompt samples,
fast delivery and flexible payment way.
Company Profile
12-year Experience of Manufacturing Connectors
Established in 2004, Xinpei is your reliable supplier for most of
connectors. Our products are widely trusted by reputable and
famouse manufacturers of household appliances, computer
peripherals, medical equipment, locomotives, telecommunication
device and other relative field.
Offering One-stop Sourcing Solutions for International Buyers
At our ISO 9001:2008 certified factory in Dongguan, mainland China,
we make UL-listed goods by using automatic equipment for uniform
product quality. By our integrated molding, mass production and
assembly services are carried out by 100 skilled workers and the
professional account executive can offer an one-stop sourcing
solution to all international buyers.
Advanced Machines from Japan and Taiwan
We use advanced machinery from Japan and Taiwan to guarantee
efficient and precise manufacturing. We have a commitment in
delivering superior quality products at competitive prices.
Our advantages are as following:
- We offer complete end-to-end customized manufacturing solutions
- We have four mechanism engineers to refine your design for
production
- We skillfully use AutoCAD, SolidWorks and Pro/E software to design
your customized project
- Our materials are sourced from Switzerland, Japan and Taiwan
- Reputable manufacturers like Amphenol and AOC trust and cooperate
with us for many years
- We own advanced inspection equipment like X-ray testing machine,
high pressure testing machine projector, fully automatic tension
meter, salt spray testing machine, insulation pressure testing
machine and 3D optical image measuring testers to ensure the
highest quality possible
- We accept small quantity orders
- Reply inquiries within eight hours
- We have more than 15 years of experience in handling OEM and ODM
orders
Contact Us Now
We are looking forward to establishing long-term business
relationship with you in the near future. So please inquire to us
today and receive our fast reply within eight hours.