2 Rows Of Pits Side Draft Paint Booth For Painting And Drying Bus

Brand Name:WINDAN
Certification:C.E . ISO
Model Number:WD-15-5
Minimum Order Quantity:1 SET
Place of Origin:GUANGZHOU, CHINA
Price:USD20000-23000/Set
Contact Now

Add to Cart

Active Member
Location: Guangzhou Guangdong China
Address: Shanglong building No.3, Jiangxia east two road ,Huangshi East, Baiyun District, Guangzhou.
Supplier`s last login times: within 36 hours
Product Details Company Profile
Product Details

2 Rows Of Pits Side Draft Paint Booth For Painting And Drying Bus


Advantages:

  1. Professional manufacture Bus spray booth
  2. Best price and after-sale service
  3. Installation spray booth for the abroad is approved
  4. suitable for painting truck or Bus
  5. Advantages of combined paint spraying


Detail Specification WD-15-5


Inside dimension

15000× 5000× 5000 mm(L× W× H)

Outside dimension

15144× 6896× 5600 mm(L× W× H)

Pits

2 rows of pits in the ground for exhaust, dimension of each pit is

13850× 760mm(L× W), with galvanized grilles made by twisted steel

and flat bar above.

Front door

Folding door, 4-folds, 4000× 4500mm(W× H), galvanized steel frame,

with polystyrene(EPS) inside, colour: blue.

Emergency door

2 units, 800× 2000 mm (WXH), colour: white.

Room body

Profiled bar beams in the roof to strengthen the room body; wall panel

thickness: 70mm, width: 1150mm, tongue and groove structure,0.476mm

colour steel with polystyrene(EPS) insulation inside, colour: white.

Light system

Ceiling Lights: 18Units× 4Pcs=72Pcs× 36W, with electronic ballasts.
Side Lights: 22Units× 4Pcs=88Pcs× 36W, with electronic ballasts,

up and down setting installation.

Generator cabinet

Intake from side upper direction, exhaust from back upper direction,

quadrate steel frame, outside is white coated steel, inside is galvanized

steel, filled with heat preservation material in the middle.

Intake and exhaust system

2 units, in total 4× 7.5KWdouble-intake centrifugal fans for intake,

model YDW4.5M, air capacity is 21000m 3 /h for each fan;

2× 11KW double-intake centrifugal fans for exhaust, with motoroutside,

belt-drive, model TAE-710H, air capacity is 36000m3/h for

each fan. Equip manual dampers for exhaust air.

Heating system

2 units RIELLO RG5S diesel burners, heating productivity: 520000

Kcal/h, stainless steel heat exchanger, pneumatic dampers actuate

from spraying to baking cycle.

Purification system

Pre-filter, high efficiency filter(ceiling filter), exhaust fiberglass filter,

activated carbon filter.

Roof

50mm thick EPS heat preservation panels.

Control system

Spraying, heat spraying, baking, time setting, lighting switch, failure

indicator, thermostat, power supply switch, emergency stop, ampere

meter,voltmeter, hours meter, temperature limit controller, pressure

gauge. Exhaust star-delta motor start.

Total power

60KW



Spray Booth Technical Parameters WD-15-5


Inside dimension

15000×5000×5000 mm(L×W×H)

Outside dimension

15144×6896×5600mm (L×W×H)

Width of Entrance

4000mm

Height of Entrance

4500mm

Escape door dimension

800×2000 mm(W×L)

Intake air fan capacity

84000 m3/h

Exhaust air fan capacity

72000 m3/h

Free air speed

≥0.3 ms

Frequency of Air Exchange

223(time/h )

Maximum working temperature

80

Max. Heating Productivity

520000 Kcal/h

Illumination (Lux)

≥1200

Air Filter Efficiency

≥95%

Noise

<85db

Total power

60KW


Product in factory



Spray booth comonent part





WINDAN SPRAY BOOTH IN THE EXHIBITION




Warranty
All electron component are guaranteed for 12 months from the date of receipt.During warranty damage
are free replacement.Customer bear the expense of freightage.


Something about the spray booth

Improper Operation of the Spray Booth System may cause the following dangers:


· Danger of fire or explosion because of :

  • The chemical imbalance in the working area during the painting phase due to not turning the unit on, operating in the wrong phase, or clogging of the filters.
  • When enough particulate accumulates in the booth, there is a danger of spontaneous combustion.
  • due to inadequate, or total lack of ventilation during the operating phases of the booth (painting -flash-off -bake)
  • due to an improperly operating burner.

Atmospheric imbalance in the environment caused by the solids emission and particles of the

unintended painting substance due to the insufficient operation of the exhaust paint arrest or filters.

An excessive buildup of over spray on the floor, in the duct work, the heating system, or the pit,

should be prevented. It could ignite spontaneously or from some equipment malfunction types.



Welcome to contact us for Quotation


China 2 Rows Of Pits Side Draft Paint Booth For Painting And Drying Bus supplier

2 Rows Of Pits Side Draft Paint Booth For Painting And Drying Bus

Inquiry Cart 0