Automatic Nail Making Machine Z94

Apart from the general steel nails, our newly developed high speed automatic nail making machine with low noise generation also can manufacture special shaped nails such as linoleum nails, roofing nails, double cap nails, U-shaped nails, twist nails, concrete nails, etc. This equipment consists of lubricating system and driving system. The driving system covers wire feeding, wire clamping, cutting, and stamping.

Z94-1C Automatic Nail Making Machine
Z94-1C automatic nail making machine can produce 450 pieces of nails per minute. All those nails come with the length ranging from 9mm to 25mm.

Parameters

Z94-2C Automatic Nail Making Machine
Z94-2C automatic nail making machine is used to manufacture 16mm to 50mm long nails. Its production rate is 350 pieces per minute.

Parameters

Z94-3C Automatic Nail Making Machine
Z94-3C automatic nail making machine comes with the production rate up to 320 pieces per minute. It is applicable for the nails with the length from 30mm to 75mm.

Parameters

Z94-4C Automatic Nail Making Machine
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.

Parameters

Z94-5.5C Automatic Nail Making Machine
Z94-5.5C automatic nail making machine whose production rate is 180 pieces per minute is designed for making the nails of 80mm to 150mm long.

Parameters

Z94-6.5C Automatic Nail Making Machine
Z94-6.5C automatic nail making machine designed for manufacturing the 100mm to 200mm long nails can produce 160 pieces per minute.

Parameters

In the nail making process, our equipment has the auxiliary machines like wire reel, nail cutter grinder, and nail polishing machine. The main wearing parts are nail mold, nail knife, and punch pin.

Production Principle
This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional nail making machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gear.

Production Process
The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically eject through the ejector.

Parameters

Wire Reel
It is used for the wire coil laying Wire-laying frame/Wire reel

Nail Cutter Grinder
It is used for grinding the nail knife by the grinding wheel.
The necessary auxiliary for nail making machines. This grinder is used for keeping nail knife be sharp , and it's special grinder for nail knife ( nail cutter )

Nail Polishing Machine
This machine is used for polishing the nails, caps, etc. After put into the roller, the finished nail will be free from sharp edges and greasy dirt after having been rolled together with the sawdust for about 1 hour. Then, use the sieve plate to separate the sawdust and nails. The nail could become brighter and anti-rust after polishing.

Parameters

Maintenance
1) Ensure the cleanness of the automatic nail making machine, and the nail mold should be frequently washed. Do not use the rusty wire for nail making.
2) Be sure the well lubrication of the nail making machine before starting. Especially for the new nail making machine, frequently lubricate the machine parts with oil, grease.
3) Regularly use the nail cutter grinder to grind the nail knife.
4) When operating the machine, you should always pay attention to the unusual noise as well as the temperature changes of the frictional parts.

Rizhao Jiuheng is a professional automatic nail making machine manufacturer and supplier in China. We also offer wire drawing machine, wire hanger making machine, well type annealing furnace, and much more.

Rizhao Jiuheng Machinery Factory is a Chinese nail making machine, wire drawing machine, wire hanger making machine
manufacturer established in 1995. We offer an extensive line of JIUHENG brand qualified machines including
(1) Automatic Nail making machines and all kinds of auxiliary machines required by the complete production lines.
(2) Steel wire drawing machines and all kinds of auxiliary machines & devices.
(3) Automatic wire hanger machines and it's auxiliary machines.
The products crafted by our equipment can be extensively applied in various sectors, such as the construction industry, decoration
industry and other related fields. For instance, the automatic nail making machine can be used to create numerous kinds of
common nails, rivets, roofing nails, double cap nails, and coil nails, among many others, And our wire drawing machine is capable
of drawing low-carbon steel, medium-carbon steel, high-carbon steel, copper, aluminum, or other alloy wires. And our wire hanger
making machine can produce wire hanger, galvanized hanger, plastic coated wire hanger. We produce machine according to
customer’s requirement.
Rizhao Jiuheng is well known for its excellent product quality, competitive product price, complete article range, and first class service.
In the past decade our company has grown rapidly due to several different factors. The dedication of our research and design
department, our factory's devotion to enhancing the technology of our mechanical equipment, absorbing new ideas from other
manufacturers of the same field, and developing new products have all been instrumental in our growth as a company.
Rizhao Jiuheng is also supplied with raw materials from our local supporting factory, this cuts transportation costs and make
business much more convenient. Our location in Rizhao City also provides us with an excellent route to Qingdao port, only 1.5 hours away. We employ 15 professional management personnel and 50 technical personnel who all receive technical training
regularly to ensure maximum efficiency.
Our nail maker, wire drawing machine, wire hanger making machine, and other related equipment serves the Chinese market,
but also is popular in the Middle East, Europe, Africa, and Latin America, to name a few.

"Trust come from quality", Jiuheng group with strong comprehensive strength, exquisite technology, perfect service, as always,
willing to provide you with leading-edge technology, machine products, and whole plant turnkey service!