74HC4052D integrated circuit ic electronic components Dual 4- channel analog multiplexer

74HC4052; 74HCT4052

Dual 4-channel analog multiplexer, demultiplexer

FEATURES

• Wide analog input voltage range from −5 V to +5 V

• Low ON-resistance:

– 80 Ω (typical) at V_CC − V_EE = 4.5 V

– 70 Ω (typical) at V_CC − V_EE = 6.0 V

– 60 Ω (typical) at V_CC − V_EE = 9.0 V

• Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals

• Typical “break before make” built in

• Complies with JEDEC standard no. 7A

• ESD protection:

– HBM EIA/JESD22-A114-B exceeds 2000 V

– MM EIA/JESD22-A115-A exceeds 200 V.

• Specified from −40 °C to +85 °C and −40 °C to +125 °C.

APPLICATIONS

• Analog multiplexing and demultiplexing

• Digital multiplexing and demultiplexing

• Signal gating.

DESCRIPTION

The 74HC4052 and 74HCT4052 are high-speed Si-gate CMOS devices and are pin compatible with the HEF4052B. They are specified in compliance with JEDEC standard no. 7A.

The 74HC4052 and 74HCT4052 are dual 4-channel analog multiplexers or demultiplexers with common select logic. Each multiplexer has four independent inputs/outputs (pins nY0 to nY3) and a common input/output (pin nZ). The common channel select logics include two digital select inputs (pins S0 and S1) and an active LOW enable input (pin E). When pin E = LOW, one of the four switches is selected (low-impedance ON-state) with pins S0 and S1. When pin E = HIGH, all switches are in the high-impedance OFF-state, independent of pins S0 and S1.

V_CC and GND are the supply voltage pins for the digital control inputs (pins S0, S1, and E). The V_CC to GND ranges are 2.0 V to 10.0 V for 74HC4052 and 4.5 V to 5.5 V for 74HCT4052. The analog inputs/outputs (pins nY0 to nY3 and nZ) can swing between V_CC as a positive limit and V_EE as a negative limit. V_CC − V_EE may not exceed 10.0 V.

For operation as a digital multiplexer/demultiplexer, V_EE is connected to GND (typically ground).

LIMITING VALUES

In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to V_EE = GND (ground = 0 V); note 1.

Notes

1. To avoid drawing V_CC current out of pins nZ, when switch current flows in pins nYn, the voltage drop across the bidirectional switch must not exceed 0.4 V. If the switch current flows into pins nZ, no V_CC current will flow out of pins nYn. In this case there is no limit for the voltage drop across the switch, but the voltages at pins nYn and nZ may not exceed V_CC or V_EE.

2. For DIP16 packages: above 70 °C derate linearly with 12 mW/K.

For SO16 packages: above 70 °C derate linearly with 8 mW/K.

For SSOP16 and TSSOP16 packages: above 60 °C derate linearly with 5.5 mW/K.

For DHVQFN16 packages: above 60 °C derate linearly with 4.5 mW/K.

Functional diagram

King--- Originator of ANTERWELL, engaged in the IC electronics industry in 1998 and establish ANTERWELL in 2004. The company is located in Shenzhen Huaqiang North, the largest electronic center in Asia. Our main business is the technical development and electronic products import and export business. Currently, we have branches in Hong Kong and Malaysia.

Up to now. ANTERWELL have more than 1,000,000 types of electronic components in stock. ANTERWELL has become one of the top choices for purchasing IC chips both domestically and internationally. King is a senior IC chip expert, sales engineer, and mentor, leading an elite team with customer first, quality first, honesty, trustworthiness, and mutual benefit. We look forward to cooperate with you to create a better future!

ANTERWELL’s main products include semiconductors, resistors, capacitors, diodes, inductors, connectors, transistors, sensors, etc. Involving the major well-known brands such like: TI, XILINX, FAIRCHILD, STM, MICRON, MICROCHIP, TDK, SAMSUNG, ON, NXP,IR,ADI, ATMEL,VISHAY,LINEAR etc.

ANTERWELL adheres to the development concept and purpose of "direct stock offer, excellent quality, favorable price, and sincere service", which is deeply recognized by domestic and foreign customers. Based on the long-term development goal, ANTERWELL provides customers with standardized, professional, and diversified high-quality services through a strong market service network. ANTEWRELL has multiple skilled and capable executives with a professional QC team and excellent sales team to win the high support and trust of the vast customer base! We provide the best quality, price and service.

ANTERWELL will be your best Partner.