

Add to Cart
Super Brightnes Indoor LED Display Screen , Indoor LED Wall Low
Energy Consumption
Applications:
1: Full color LED display: Equally or compactly make the red,
green, blue color in one DOT, equally distribute at the panel, so
make the whole display
2: Usually apply for physical sports, advertisement, bank, stock
exchange, station, port, marketplace, telecommunication,
department, school, monitor, restaurant, entertainment.
3: Wide adjustability range allows the user to regulate the display
brightness for all environmental conditions.
4: Good uniformity and consistency provides for an amazingly sharp,
vivid and clear Image.
5: Wide viewing angle up to 110 degrees horizontal and 60 degrees
vertical
6: Low energy consumption and rapid heat dissipation aid in
extending the product life span.
7: Easy to maintain with simple LED module replacement.
8: Using SMT or AI automatic production line reduces manufacturing
variation and improves product quality.
9: Unique cabinet design allows for quick assembly and disassembly;
especially for temporary exhibits and renting
Specifications:
Items | P7.62 Indoor Full Color Display | |
Module | Pixel Pitch | 7.62mm |
Pixel Density(dot/m²) | 17222 | |
Pixel Configuration | 1R1G1B | |
Packaged Type of LED | SMD | |
Module Size(mm) | 244 * 244 or 488 * 244 mm | |
Module Resolution | 32 * 32 or 64 * 32 | |
Technical | Brightness(cd/m²) | 3500 |
Max Power Consumption(w/m²) | 700 | |
Best Viewing Distance(m) | 7-21 | |
Viewing Angle | 120°V/120°H | |
Drive Mode | Constant Current drive 1/8 scan | |
Driving | Driving IC MBI5026 / MBI5024 | |
Frame-change Frequency | ≥60 Hz/s | |
Refresh Rate | ≥600Hz/s | |
Gray Grade Level | 4096 grades | |
Color | 65536kinds of colors | |
Display Mode | 1024*768 | |
Control System | Synchronization Control | |
Transmission Distance | Reticle≤100M;Multi-mode Fiber≤500M;Single-mode Fiber≤10000M | |
Out of Control | Rate≤0.0001 | |
Lifespan | ≥100000H | |
Driving Power | 5V | |
Working Voltage | AC220V±10% 47HZ~60hz | |
Working Temperature | -10ºC~+55ºC | |
Working Humidity | 5%RH~85%RH |
Features:
1. High-precision optical design of LED, each pixel is integrated
by RGB LED chips.
2. Perfect color mixing efficiency: rational design on reflector
and chip arrangement makes RGB colors mixed and condensed
sufficiently and creates no granular sensation.
3. Good performance in flatness, uniformity, consistency and
clarity.
4. The raw material of all of the outdoor products including LED
chips, mask, glue and steel cabinets have the ability of enduring
high temperature and high humidity , and being anti-UV, waterproof,
anticorrosion and antirust.
5. Every production process is well controlled and all of the
electronic components are covered by 2mm Tri-Guard Lacquer to
ensure no oxidation, no rusty and no moisture. Five-Guard Lacquer
will be used for special requirements.
6. Large viewing angle, up to 150°horizontally and 140°vertically,
with no image distortion and no color cast at any angle within this
range.
7. All of the cabinets are tested by flush, shower and soaking, to
ensure the waterproof grade of front side to be IP40.