Programmable dream color SMD5050 WS2801 WS2811 WS2812B WS2813 addressable rgb led strip

Brand Name:NMD
Certification:CE,ROHS
Model Number:NMD-WS2813-60
Minimum Order Quantity:5M
Delivery Time:3-5days
Payment Terms:Paypal,TT,Western Union
Contact Now

Add to Cart

Active Member
Location: Shenzhen Guangdong China
Address: A2 Building,TangWei Fuyuan Industry Zone,Fuyong Town,Baoan District,Shenzhen,China
Supplier`s last login times: within 35 hours
Product Details Company Profile
Product Details

Programmable dream color SMD5050 WS2801 WS2811 WS2812B WS2813 addressable rgb led strip

Features and Benefits

The control circuit and the LED share the only power source.

The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel.

Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place.

Built-in power-on reset and brown-out reset circuits.

The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz/s.

Serial cascade interface, data receiving and decoding depend on just one signal line.

Dual-signal wires version, signal break-point continuous transmission.

Any two point the distance more than 3m transmission signal without any increase circuit.

When the refresh rate is 30fps, cascade numbers are far more than 1024 points.

Data transmitting at speeds of up to 800Kbps.

Good color consistency reliability, high cost-effective.
Patameter:

Input voltage

DC5V

Current

2.88A

LED Qty

60pcs SMD 5050 meter

IC Qty

60pcs ws2813 IC chips per meter, ic built inside of led

Wave length(NM):

R-650mcd, G-520mcd,B-460mcd

Power(W/M)

14.4W/M

Signal

ws2813 chip

View angle

120 degree

Life span

over 50000hrs

Dimension

5000*12*2.2mm

Certification

ce & rohs

WaterProof

IP20,IP65,IP67

Packaging

5M/reel in antistatic bag

Connection:
1) Signal wire: DC+, DAT,CLK, GND
2) DC+ and GND connect to power supplier; DAT,CLK and GND connect to controller
3) Relative Controller: SPI controller support ws2811; when use DMX decorder, can connect to DMX system
4) Support online control


Color:
1) Each pixel can be controlled individually
2) Can show any color
3) Can be used as flexible led display screen to show image and video


Installation Notice:
1) Make sure the connection is correct according to the diagram
2) Pay attention to the parameters limit of voltage. DO NOT run over the peak value
3) Keep the surface of installation clean and smooth avoid breaking off
4) Avoiding the crook area just the position of LED and other components, in order to protect the product and extend the life span of the product

Controller: DMX controller & decoder & SD controller & arduino controller
Change color individually and addressable full color














China Programmable dream color SMD5050 WS2801 WS2811 WS2812B WS2813 addressable rgb led strip supplier

Programmable dream color SMD5050 WS2801 WS2811 WS2812B WS2813 addressable rgb led strip

Inquiry Cart 0