

Add to Cart
Cell site telecom tower on a power transmission monopole
Cell site telecom tower often refer to monopole tower, but it installed on one power transmission pole. Then both telecom and transmission function used on one pole body. cell site often adopt GSM or panel antenna to absorb or radiate network.
MEGATRO mainly provide fabrication and design of this cell site
monopole telecom & transmission tower for our overseas clients.
This type structure foundation adopt anchor bolts connect with
structure base plate and stub legs. Structure foundation belongs to
precast concrete foundation with template and anchor bolts
underground. And this structure was made of hollow pipe, which can
be quickly deployed with minimal hardware and labor, factory
drilled to customer specifications or modified in the field, if
required, using a carbide-tip bit. In general, this type of pole
fabricated with mild steel or high strength steel, such as ASTM
A36, ASTM A572 GR50, GR65, Q235B, Q345B, S355JO, S355JR, ST37,
ST52, BS 50B or other.
Our cell site telecom& transmission tower often adopt with some
type as follow:
(1) Flange connection
(2) Slip joint
(2) Step type
(3) Stagger type
(4) Others
Pole foundation types have:
Direct embedment
Anchor bolt
Based plate
Vibratory steel caisson
MEGATRO provide cell site telecom& transmission tower at a much
lower material cost than self supporting towers due to the
efficient use of steel guy lines.
Since 2004, MEGATRO has been manufacturing every type of lattice
transmission tower & tapered steel poles for utility
&telecom applications. MEGATRO pioneered the development of
transmission tower, telecom tower, substation, and other steel
structure and was also at the forefront in the design of
Transmission tower. MEGATRO has a complete staff of professional
engineering personnel trained in the PLS Pole program and three
different manufacturing processes for producing steel towers, poles
and other supports. We utilize the latest versions of PLS-CADD,
PLS-POLE, TOWER, AutoCAD and other CAD software.
MEGATRO is one of the few manufactures who assemble a face of cell
site telecom& transmission tower. This attention to quality may
not be the cheapest process but it does insure every tower meets
our high standards of quality. And it helps to reduce on-site
construction cost due to mismatched assemblies. MEGATRO cell site
telecom& transmission tower
Systems can accommodate a variety of cross-arm and telecom antenna
with mounts. After fabrication cell site telecom& transmission
towers are delivered to the galvanizing facility to be Hot DIP
Galvanized. Towers are processed through the facility by Caustic
Cleaning, Pickling, and then Fluxing. These strict procedures
insure years of maintenance free towers. Even we take secondary
finish for client again, which as duplex surface treatment.
Other information:
Availability size: Based on the customer's requirements.
Material: Chinese material or as per clients requirement
Package: Both parties discuss before delivery
Port of Loading: Qingdao Port
Lead Time: One month or based on the customer's needs
Minimum order: 1 TON
Fabrication standard: Chinese Standard or other standard which
client accepted
Steel grades
Tower body: Chinese steel Q345B, which same to ASTM A572 GR50
Other webs, bracing and not stress plate and angle steel: Chinese
Q235B, which same to ASTM A36
Plates: Chinese steel Q345B, which same to ASTM A572 GR50
Bolts: Chinese grade 6.8 and 8.8, which similar to ASTM A394
A) Dimension and tolerance for angle are according to
GB/T1591-1994, similar to EN 10056-1/2
B) Hot DIP galvanization in accordance with GB/T 13912-2002, which
similar to ASTM A 123
C) The welding will be performance in accordance with AWS D1.1 or
CWB standard
If any special requirement, we can design and discuss with client.