

Add to Cart
Railway sleeper fixing screws Black Oxide ISO 24 Dia 160 Length SS8
Rail sleeper screw spikes are used to fasten sole plates and ribbed
base plates to wooden sleepers. In rail construction with the
concrete sleepers, the rail sleeper screw is used in combination
with a plastic dowel pressed in the concrete sleeper, indirect or
direct fastenings of rails on concrete and wooden sleepers.
Characteristically, the sleeper screw thread may only be produced
in a hotforming operation. The different shapes of the head
correspond to the pass form of the respective spanner used for
fastening and loosening of the rail sleeper screws.
The screw spike costs more to manufacture than the dog spike or dog
nail, but has the advantage of greater fixing power; approximately
twice that of a dog spike, and can be used in combination with
spring washers.
Material
Material | ||||
Grade | 4.6 | 5.6 | 8.8 | 10.9 |
Material | Q235 | 35# | 45# | 40Cr |
Mechanical properties | Tensile strength: ≥400Mpa | Tensile strength:≥500Mpa | Tensile strength:≥800Mpa | Tensile strength:≥1000Mpa |
Yield strength:≥240Mpa | Yield strength:≥300Mpa | Yield strength:≥640Mpa | Yield strength:≥900Mpa | |
Elongation:≥22% | Elongation:≥20% | Elongation:≥12% | Elongation:≥9% | |
Cold bending: 90 degree without crack | ||||
Surface | plain (oiled), Oxide black, Zinc, HDG, wax, bitumen, Dacromet, Sherardizing |
Note ( 5.6 as a sample)
the first 5: tensile strength of material 35# is 500MPa;
the second 0.6: the yield ratio is 0.6;
the yield strength of material 35# is 500MPa x 0.6 = 300 MPa.
MOQ: 5000PCS
Packing: 25Kg plastic bags and wooden pallets or according to
clients' requirement
Process
Surface Treatment
Inspection machine
Package
1. 25kg per double layer woven bag+ free fumigation wooden pallet
36bags/pallet,
24pallets/container
2. Keg
3. in according with your request
Similarity
1. We produce the rail sleeper screw spikes for the USA with the
standard ASTMA66-87, cold bending 90 degree without cracks.
Standard strength 65000PSI or high strength 100000psi is available.
Diameter: 3/4", 7/8", 15/16"
Length: 5-1/2", 6", 7", 8", 10"
Grade: 4.6, 5.6, 8.8
Material: Q235, 35#, 45#
2. Rail sleeper screw spikes with big disk are mostly used in South
America and Africa
A taper of 1mm in the core and thread diameters towards to the
point of the screw over the portion shown parallel is allowed,
provided the tolerance on the diameter at the upper end is not
exceeded. The material for the rail sleeper screw is complying with
British standard N 15-1961.
Diameter: 22mm, 23mm
Length: 115mm, 133mm, 178mm
Grade: 4.6, 5.6
Material: Q235, 35#
3. Sleeper screw 3V meets with NF F50-006, Grade 4.6 and 5.6. The
mechanical properties are in accordance with NF F 50006, tension
strength 700MPA (min), elongation 12% (min), and cold bending 30
degree without crack.
Grade: 4.6, 5.6
Material: Q235, 35#
Surface Treatment: Plain (oiled), Black painting, Zinc, HDG
Type | Dimension(mm) | Weight (Kg) |
V20-135 | M20×135 | 0.438 |
V23-115 | M23×115 | 0.48 |
V23-135 | M23×135 | 0.55 |
V23-155 | M23×155 | 0.62 |
V23-215 | M23×215 | 0.78 |
V26-115 | M26×115 | 0.55 |
4. Screw spike for wooden sleeper (high tension screw spike)
Size: 15/16×6-1/2
Surface Treatment: Plain (waxed), Black painting
Tensile Strength | Yield Strength | Elongation | Reduction of Area | Hardness |
120,000psi(min) | 92,000psi(min) | 14%(min) | 35%(min) | HRC22-HRC32 |
Full size carbon steel screw spikes shall stand being bent cold
45degree around a pin three times, the spike's diameter without
crack on the outside of the bent portion.
Material: 45#, heat treatment
5. Coach screw is used for the mining industry in South Africa
Diameter: 18mm
Length: 65mm and 75mm
Material: Q195 and Q235
Surface Treatment: Zinc
Grade: 4.6
6. DHS35 rail sleeper screw spike, supports the use of the SKL14 rail
fastening system
Diameter: 24mm
Length: 158mm and 161mm
Grade: 4.6, 5.6, 8.8
Material: Q235, 35#, 45#
Surface Treatment: Plain (oiled), Black painting, Zinc, HDG
7.Timber drive spikes can reduce installation and maintenance costs.
The spikes are used for timber construction highway crossing planks
and panels, bridge and trestle guard rails, motor car set-off,
docks, etc. The washer head is single forged and the excellent
holding power of threads provides tight installation. The spikes
are easily installed, driven with a maul or pneumatic spike driver.
They cannot be overdriven and are easily removed for reuse with a
hand or power tool. The drive spikes are available for a wide
variety of installations and maintenance of way, and meet with the
standard ASTMA66-87, cold bending 90 degree without crack.
Main Size: 5/8×10 and 7/8×7
Grade: 5.6
Material: 35#
Surface Treatment: Zinc or according to clients' requirement
Tensile Strength | Yield Strength | Elongation 2" |
414Mpa | 207Mpa | >18% |