304 316 16mo3 Carbon Steel Alloy Steel Sa179 Embedded Fin Tube

Brand Name:Torich
Certification:ISO
Model Number:SA179
Minimum Order Quantity:1tons
Delivery Time:10-30days
Payment Terms:L/C, T/T
Contact Now

Add to Cart

Verified Supplier
Location: Ningbo Zhejiang China
Address: Suite 1004, Hongan Plaza, #258 Die Yuan Road, Yinzhou District, Ningbo City, China
Supplier`s last login times: within 42 hours
Product Details Company Profile
Product Details

304 316 16Mo3 Carbon Steel Alloy Steel Embedded G Fin Tube Fin And Tube Heat Exchanger Dx Fintubes For Heat Exchangers


Finned tubes are used in applications involving the transfer of heat from a hot fluid to a colder fluid through a tube wall. The rate at which such heat transfer can occur depends on three factors: (1) the temperature difference between the two fluids; (2) the heat transfer coefficient between each of the fluids and the tube wall; and (3) the surface area to which each fluid is exposed. In the case of a bare (unfinned) tubes, where the outside surface area is not significantly greater than the inside surface area, the fluid with the lowest heat transfer coefficient will dictate the overall heat transfer rate. When the heat transfer coefficient of the fluid inside the tube is several times larger than that of fluid outside the tube (for example steam inside and oil outside), the overall heat transfer rate can be greatly improved by increasing the outside surface of the tube. In mathematical terms, the product of heat transfer coefficient for the outside fluid multiplied by the outside surface area is made to more closely match the product of the inside fluid heat transfer coefficient multiplied by the inside surface area.

Base tube material: SA192 SMLS 31.8mmOD*2.9mmTHK*7260mmLG Fin

Material: CS; FPM67fins X 1.5 mm THK x 75 mm W x 160 mm H

Manufacturing Process: It adopts high frequency welding spiral technology, the national patent technology with high frequency power supplies as the heat source to heat the steel strip, steel pipe at the same time,be welded together Material: Steel, Carbon Steel, etc. Bare tube OD: 25-63mm Fin Pitch: 8-30mm Fin Height: <200mm Fin Thick: 1.5-3.5mm


NameBase tube
(OD) mm
Fin Pitch
(mm)
length
(m)
MinMaxMinMaxMinMax
Extruded aluminum fin tube12.7512.1100.520
L/LL/KL aluminum fin tube19512.13.20.515
Embedded aluminum fin tube19422.33.20.515
Low fin tube12.7320.820.520
Spiral fin tube12.7700.520
ERW HF spiral fin tube162193250.528
ERW HF spiral serrated fin tube162193250.528
Serrated width(mm)
10 min~26 max
Serrated depth(mm)
4 min~16 max
ERW studded tube892001650215
DC ERW H/HH fin tube2551925115
H/HH finsLength(mm)
60 min-150 max
Thickness(mm)
1.5 min~4 max
Width(mm)
30 min~50 max

Applications
Typical examples of applications where finned tubes are used include the following:
A wide variety of economizers and waste heat recovery units to utilize heat from boiler flue gas, gas turbine exhaust, incinerators, etc.
Glycol dehydration units
Fired heaters, such as LNG vaporizers, air pre-heaters, oil heaters, etc.
Asphalt tank heaters
Air coolers, such as compressor jacket water and lube oil coolers
Lumber drying kilns, and similar applications
Livestock enclosure and greenhouse heaters










China 304 316 16mo3 Carbon Steel Alloy Steel Sa179 Embedded Fin Tube supplier

304 316 16mo3 Carbon Steel Alloy Steel Sa179 Embedded Fin Tube

Inquiry Cart 0