

Add to Cart
32 Bit Elevator Spare Parts Standard Serial Step Main Control Board Dc20v
The main controller board is equipped with a 32-bit industrial ARM
processor, and comes with dual-CPU to ensure improved system
safety. It offers strong anti-interference and anti-static
capabilities and passed the test for contact discharge up to 8000V.
The 32-bit standard serial main controller board is manufactured
according to EN81 and GB7588 safety rules, and is ideal for control
of elevators in commercial buildings and residential buildings up
to 64 floors. It helps ensure smooth, steady, accurate and
comfortable elevator running. The maximum elevator speed is up to
4m/s.
The serial main controller board supports CAN bus communication and
hence supports weight compensation system with CAN bus interface.
STEP handheld elevator controller can also be connected to the main
controller board. The main controller board also supports functions
such as remote monitoring, elevator car performance test, and
control of both asynchronous and synchronous traction motor. And it
is compatible with encoders with differential, open collector, or
pull-push outputs. It can keep maximally 20 historic records for
elevator failures.
With IC card intelligent managejment function, the main controller
board can be integrated into a Building Management System for
building security monitoring use. It also supports remote
monitoring function. With isolated CAN transceiver, the main
controller board offers reduced electromagnetic interference
susceptibility while being used for building security monitoring
system.
Characteristic of 32-bit Standard Serial Main Controller Board |
1. 32-bit high-performance industrial class ARM controller |
2. Wide voltage range from DC20V to DC28V |
3. Safety chain and door-lock checking function |
4. District monitoring through isolated CAN, strong anti-interference performance |
5. Powerful electromagnetic anti-interference ability (EFT- 4000V) |
6. Optimal electrostatic anti-interference ability (ESD 8000V) |
7. EN81 and GB7588 compliant, CE and CSA certified |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.