

Add to Cart
Motor for Elevator Door Operator Parts
Motor for Door Operator
1. The motor adopts enclosed structure and the protection level reaches IP65.
2. Optimizing the electromagnetic design to make the motor have smaller slot torque,stable operation at low speed and high eficiency.
3. Using high performance permanent magnet material, design overload capacity (≥250%)
4. The military grade electronic components was used in encoder for higher impact resistance.
5. The lead wire adopts silicoin rubber high temperature shielded wire, which has good high temperature resistance and anti-interference ability.
6. Class-F Insulation Level, Make Motor Have Higher Life.
7. Compact structure design can further reduce the overall size of door operator.
PARAMETER
Model | PM61855 | |||||
---|---|---|---|---|---|---|
Dimensions(mm) | 150x150x90.5 | Rated Voltage(V) | 80 | Rated Current(A) | 1.2 | |
Rated Wattage(W) | 94 | Poles | 16 | Rated Torque(N·m) | 5.0 | |
Rated Speed(rpm) | 180 | Rated Frequency(Hz) | 24 | Working Type | 40%(S3 on 6s off 9s) | |
Classification | IP65 | Insulation Grade | F | |||
Encoder Classification | A/B/C/D/E | |||||
Pulley | Tooth Outline | 5M | ||||
Tooth Number | 28 | |||||
Width of pulley(mm) | 17 |
Drawing
Motor for Door Operator
Features:
1. The motor adopts enclosed structure and the protection level
reaches IP65.
2. Optimizing the electromagnetic design to make the motor have
smaller slot torque,stable operation at low speed and high
eficiency.
3. Using high performance permanent magnet material, design
overload capacity(≥250%)
4. The military grade electronic components was used in encoder for
higher impact resistance.
5. The lead wire adopts slion rubber high temperature shielded
wire, which has good high temperature resistance and
anti-interference ability.
6. Class-F Insulation Level, Make Motor Have Higher Life.
7. Compact structure design can further reduce the overall size of
door operator.
Motor for Door Operator
Model | SN-PM61842 | |||||
Dimensions(mm) | 150x150x73.5 | Rated Voltage(V) | 36/35 | Rated Current(A) | 0.8 | |
Rated Wattage(W) | 43 | Poles | 16 | Rated Torque(N.m) | 2.3 | |
Rated Speed(rpm) | 180 | Rated Frequency(Hz) | 24 | Working Type | 40%(S3 on 6s off 9s) | |
Classification | IP65 | Insulation grade | F | |||
Encoder Classification | A/B/C/D/E | |||||
Pulley | Tooth outline | 5M | Tooth number | 28 | Width of pulley(mm) | 17 |
Drawing
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.