

Add to Cart
Single Winding Φ650/Rewinding Φ660 Gearless Traction Machine
Traction ratio: | 2:1/1:1 |
Applicable converter: | 3 phase 400V |
Brake electric current: | 7.4A |
Brake voltage: | DC200V for brake opening,and DC100V for brake holding |
Max.shaft load: | 20000kg |
Traction sheave | Single winding Φ650/Rewinding Φ660 |
This series of permanent-magnet synchronous gearless traction
machines has large capacity and dual supporting single wrap
structure, withtraction sheave located between two bearings, so
force application is more reasonable.
Drum brakes are applied for the traction machines, which have high
braking torque, high reliability and easy maintenance and
commissioning.Unique internal rotor construction and excellent
magnetic field design,enable the product to have excellent
performance, low noise level andhigh-speed steady operation.
lmported bearings are applied, which have high-carrying capacity
and long life. The encoder is intalled in various mamners to met
differentcustomer demands.This series of traction machines is
applicable for the elevator with machine room.
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements.
Configuration is not only for wire rope and rated load, but also
considered the size of the traction, as a result, the tensile
strength of wire rope is greater than the weight of the lift. The
safety factor is equipped with more than four wire rope. So it
won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator
running?
If it occurs, the elevator will automatically stop due to the
electrical and mechanical safety device. In case of power
failure,elevator brakes will automatically taken. In addition, the
power supply departments such as planned outage, prior notice are
also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of
elevator will automatically restart without any danger. With anti
clamping switch, once the gate touched, this switching action make
the elevator unable to be closed and even reopened. In addition,
closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the
(tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily
proportional to the operation complexity. Therefore, escalators
designed by us apply an integrated structure, so that the equipment
is more precise and more efficient and allows easier and more
convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.