Residential 50kw / 80kw Water Source Heat Pump Package Unit Horizontal / Vertical

Horizontal/Vertical Type Water (Ground) Source Heat Pump Package Unit 50.0-495.0kW

Specifications

Note:

■ The preceding nominal cooling capacity is measured in the following conditions: the indoor dry/wet bulb reads 27°C/19°C, and the inlet/outlet water temperature is 30°C/35°C.

■ The preceding nominal heating capacity is measured in the following conditions: the indoor dry/wet bulb reads 20°C/15°C, and the inlet water temperature is 20°C.

■ The unit noise is a sound pressure level noise value measured through test in a semi-anechoic room according to relevant national.

■ The unit performance parameters are subject to change due to product improvements without prior notice. The parameters on the product nameplate prevail.

■ For details about on-site power distribution and wiring for unit installation, see the nameplate or installation manual of the unit.

Description:

EKWH series water (ground) source heat pump packaged unit has many features such as complete models, high efficiency, low noise, easy installation, and easy maintenance, and provides high air supply static pressure. It can send air over long distance through the air duct. Certain models can regulate the air supply direction to adapt to field installation. The packaged water source heat pump

is applicable for various places such as commercial plaza, factory, hotel, and office building.

Features

Flexible structure

EKWH overall water (ground) source heat pump packaged unit has a flexible structure. For example, EKWH008A(R)~EKWH070A(R) series is designed for ceiling mounting. The air supply direction can be changed from front air supply to side air supply. The

EKWH180A(R)~EKWH350A(R) are horizontal/vertical and can be ceiling mounted or floor mounted. The air supply direction can be changed 90℃ .

Convenient installation

Compared with a split-type water source heat pump, packaged water source heat pump is easier to install. It runs as long as the circulating water pipe, air duct, and power supply are connected without installation of the refrigerant connection pipe and indoor/outdoor unit signal lines, greatly reducing unit hoisting workload.

Smart Control

The use of building automation (BA) systems is more and more popular. The BA systems make remote device management possible, and can efficiently improve the device utilization rate, shorten the maintenance time, and save energy. EKWH series packaged water source heat pump provides intelligent RS485 interfaces for easy network connection. All units provide optional power off memory and self start upon power recovery.

Centralized management

In a place with large story height, for example, a mall or factory, the large-scale integrated water source heat pump can be easily designed as a full air system to greatly reduce the number of air conditioning units and facilitate centralized management. The air conditioners can be installed in the equipment room or ceiling mounted.

Higher Energy Efficiency

EKWH series water (ground) source packaged heat pump unit uses select world famous brand compressors and high-efficiency inner thread coaxial tube-in-shell heat exchangers. Through fine matching, the average cooling energy efficiency ratio can reach over 4.0. Certain units provide a cooling energy efficiency ratio of more than 4.5. For a large-capacity cooling unit with over 10 hp, parallel design for compressors is adopted for higher reliability and energy efficiency.

Multiple Protections

EKWH series packaged water source heat pump is designed with multiple security protection functions. In addition to regular under-voltage, over-voltage, and overload protection, the following protection functions are provided: pressure protection of the cooling system, protection against water flow cutoff, and protection against over-temperature of the circulating water. In addition, the controller provides sound, light, and code alarms to report fault and protection information in a timely manner.

Applications

Commercial plaza, factory, villa, hotel, and office building.

EUROKLIMAT (EK) was established in 1963 in Italy. For the past half a century, it has become famous as an energy-saving air-conditioning manufacturer in Italy and globally. Continuous innovation, new product development and top manufacturing quality are the driving force behind this growth.

EUROKLIMAT (EK) pursues the ideals of protecting the environment, providing physical comfort and adopting energy-saving into the whole process of product R&D, manufacturing and service. Our products covering residential, commercial and close control air-conditioner are manufactured according to the global generally accepted standards.