PN16 Epoxy Coating Full Bore Resilient Seated Valve

DIN 30677-2 Standard Full Bore resilient seated valve Epoxy Coating

A. Stem sealing

Three independent stem seals offering triple safety:

B. Body/bonnet connection

The unique assembly of the valve body and bonnet ensures a durable tightness:

C. Wedge nut

The fixed, integral wedge nut reduces the number of movable valve parts thus

minimizing the risk of corrosion and malfunction. The wedge nut is made of
dezincification resistant brass with lubricating abilities providing optimum compatibility

with the stainless steel stem.

D. Vulcanized wedge

The ductile iron core is fully vulcanized with drinking water approved EPDM rubber

internally and externally.

No iron parts are exposed to the medium and the excellent rubber vulcanization

prevents creeping corrosion underneath the rubber.

Guides in the wedge and on the valve body ensure a uniform closure regardless of

high pressure.

Safe operation is ensured, as the guides prevent overloading of the stem.

The wedge has a large through bore and as there are no hollows in the core, stagnant

water or impurities cannot collect and cause contamination.

Design features:

Spindle’s gaskets O-ring - “DRY THREAD” - replaceable under pressure.

Stainless steel spindle with rolled thread and bearing.

Total sufrace rubbered wedge with replaceable spindle nut.

Gate valve with full bore.

All parts are protected against corrosion.

Resilient seated gate valve to EN 1074-1 and 2 / EN 1171, with WRAS approved EPDM
rubber parts.

Body and bonnet of GJS-500-7 (GGG-50). Wedge of ductile iron with fixed wedge nut,

fully vulcanized with EPDM rubber. Stem of stainless steel min. 13% Cr with rolled thread
and wedge stop ring.

Stem sealing with 4 O-rings in a nylon bearing, an EPDM rubber manchette, and a NBR

wiper ring. EPDM bonnet gasket in a groove, countersunk bonnet bolts encircled by the

bonnet gasket and sealed with hot melt. Sockets fitted with "Euro" sealing rings of EPDM

rubber.

Epoxy coating to DIN 30677-2 and GSK guidelines - internally and externally.

FEATURES

⊙ Shot-blasting

protective surface finished by shot-blasting and the surface is smooth and neatness.

⊙ Flatting seat

Smooth continuous bore way without seating recess, it is not easy to get impurity pilled up.

Making the liquid straightway.

⊙ Treating with rubber

Both inner and outer are coated with advanced knowledge of rubber vulcanization then making

sure of the elasticity of rubber ,and make sure the exact geometry dimension. Rubber and ductile

cast iron valve hand together hardly. This can avoid fall-off due to long-term use.

⊙ Anti- corrosion

Both inner and outer are coated with non-toxic powder epoxy resin to strengthen the capacity of Corrosion resisting and raise the quality

of water supply.

⊙ Ruggedization

The older ductile iron valve is easy to rupture after being impacted by nonego. It can stop

rupture depend on the good mechanics capability of ductile iron .

⊙ Three “○” sealed ring

With the three “O” – rings, the leakage can be greatly reduced and the “O” – ring can be

replaced under this condition with pressure and without stopping water. The thrust axletree

reduces the frictional resistance and lowers the operational torque. And it can be switch seal

ring without opening and closing.

⊙ Rigid round body

The body is founded minutely, the rigid geometry size ensure inner sealing of valve without

any process.

APPLICABLE STANDARDS

⊙ American Standard
Design to ANSI/AWWA C509
Face to face dimension to ASME B16.10-2000(ISO 3 series)
Flange and drilling To SME/ANSI B16.42-1998

⊙ British Standard
Design to BS5163,BS5150
Face to face dimension to BS5163(ISO 3series,ISO19 series)
Flange and drilling To BS4504 part1(EN1092)

⊙ Germany Standard
Design to DIN3352
Face to face dimension to DIN3202(F4:ISO 14 series;F5: ISO 15 series)
Flange and drilling to BS EN1092

Applications: This valve widely applied in the liquid pipes for opening or closing fixing in such water,

sewage disposal, electric power, energetics pipe , chemical, shipping, energy sources etc.

Shanghai KangQuan Valve Co. Ltd. is a specialized valves manufacture, which has 2,500 tons of

valves output capacity annually. We pay much attention to the quality so our products are superior in

quality compared with those of other manufacturers. After years of research and development, we have

accumulated a wealth of information and experience in this field. We enjoy a high reputation in dealing

with both domestic and overseas trading.

Shanghai KangQuan Valve Co. Ltd. covers an area of 15000 square meters. Our products line includes

various kinds of gate valves, globe valves, ball valves, check valves, cock valves, butterfly valves of , etc.,

up to the international advanced standards of ANSI, API, JIS, DIN, BS and so on . Materials mainly include

carbon steel ,stainless steel ,ductile iron and so on .with hand wheel worm-gear actuator and pneumatic

and electric actuator to be selected ,widely used in the industries of petrochemical, natural gas, metallurgy,

electric power , pharmaceutical , construction, etc..

With highly qualified professionals and first class service, Shanghai KangQuan Valve Co. Ltd. has

established a highly respected enterprise which has been relied on for years. And we will continuously

offer customers the most accurate and high quality delivery service possible.

Excellent quality assurance is our sales purpose,
Competitive price is our sales policy,
On time product delivery and responsive service is our standard.

Shanghai KangQuan Valve Co. Ltd. hopes to work together with you for a better future. Let’s work

together building a mutually beneficial relationship that will last for years.