

Add to Cart
1 Ton Per Hour Gas Steam Boiler Low Pressure Boiler For Food Factory
Description
WNS series gas/oil fired steam boiler is horizontal three pass fire
tube wet back full automatic steam boiler. It normally suitable for
500kg to 20ton/h capacity, use all kinds of gas and oil fuels,such
as natural gas, lpg,lng,cng,city gas,biogas, diesel oil,heavy oil.
1. Model:WNS
2. Capacity:500kg/h-20ton/h
3. Design pressure:1.0Mpa(10bar), 1.25Mpa(13bar),
1.6Mpa(16bar),2.5Mpa(25bar)
4. Stem temperature:below 224 degree
5. Design fuel:natural gas, lpg,lng,cng,city gas,biogas, diesel
oil,heavy oil
6. Structure: three pass fire tube wet back
Boiler features
1. You will save the fuel consumption cost (save oil 3-5kg/h) and have low loss of thermal heat
effiency(exceed 92%).
(1). Three pass structure,which extend the flow of smoke and
enhance the heat transfer.
(2). Adopt bog size whole corrugated furnace,big heating
area,sastify the free expansion of boiler, improve the boiler
effiency.
(3). Whole adopt corrugated tubes,strengthening heat transfer and
eliminating welding stress. Other companies also use corrugated
tubes, but we adopt the latest professor “Li Zhiguang”(a very
famous boiler expert in China)technoly,the depth of the screw
thread and spacing between two screw threads are rationally
designed.
2. You will get enough steam output and high quality steam.
(1). Our boiler design big size water volume,the steam output is
stable and steam quality is good.
(2). Design special steam water separator,reduce steam humidity and
improve steam quality.
3. You can operate the boiler at safe and reliable case.
(1). Whole wet back structure and transition multi-loop
full-temperature condenser design, ND just material, fin tube
design,which highly reduces the back plate sheet temperature(around
50°).
(2). Double layer 12cm aluminum silicate insulation material,two
stage anti-leak design and tight seal to avoid leakage phenomenon.
(3). Design tension bars,increasing the tube plate strength,
preventing cracking.
(4). Explosion proof door design,prevent explosion, reduce the
damage to the boiler, improve the safety of boiler.
4. You can use the boiler for longer life (More than 25 years ).
(1). 5-10% overload capacity design and reasonably configurate
spare parts,reduce equipment fatigue.
(2). New type refractory material,solidification strong, long using
life,which will not fall off after shaking.
(3). Smoke chamber ultrasonic testing, overpressure 40-50% water
pressure test,ensure the boiler quality.
(4). Raw materials are provided by China famous steel and steel
pipe factory provide, which controls the boiler quality from
source.
(5). 61 years boiler manufacturing experience, mature design and
production team.
Technical parameter
Boiler model | Capacity | Pressure | Feed temp. | Steam temp. | Fuel consump. | Thermal efficiency | ||
Light oil | Heavy oil | Natural gas | ||||||
t/h | Mpa | ℃ | ℃ | kg/h | kg/h | m3/h | % | |
WNS1-1.0-Y(Q) | 1 | 1 | 20 | 184 | 65.5 | 67.3 | 84.2 | 91 |
WNS 2-1.25- Y(Q) | 2 | 1.25 | 20 | 194 | 129.6 | 132.2 | 165 | 92 |
WNS3-1.25-Y(Q) | 3 | 1.25 | 20 | 194 | 192 | 195 | 250 | 92.1 |
WNS4-1.25- Y(Q) | 4 | 1.25 | 20 | 194 | 256 | 261.9 | 323.6 | 93 |
WNS5-1.25- Y(Q) | 5 | 1.25 | 20 | 194 | 318 | 322 | 386 | 93 |
WNS6-1.25- Y(Q) | 6 | 1.25 | 20 | 194 | 380 | 390.6 | 450 | 93.2 |
WNS8-1.25- Y(Q) | 8 | 1.25 | 105 | 194 | 503 | 517 | 642 | 93.5 |
WNS10-1.25- Y(Q) | 10 | 1.25 | 105 | 194 | 628 | 643 | 805 | 93.5 |
WNS15-1.25- Y(Q) | 15 | 1.25 | 105 | 194 | 940 | 965 | 1182 | 93.5 |
WNS20-1.25- Y(Q) | 20 | 1.25 | 105 | 194 | 1250 | 1301 | 1597 | 93.5 |
For know more details, please contact by shirley@yuanda-boiler.com
Boiler Advantage
1. Safety: With water level, leakage steam, steam pressure control.
Make sure boiler working safety.
2. Product quality ensured by: Strength calculation report,
hydraulic test, X-ray, non-destructive test.
3. Efficient: Well insulation and excellent structure.
4. Spirally corrugated tube increase the strength and also meets
the needs of heat expansion of each parts.
5. Welding: Welding mainly uses advanced automatic welding, gas
protected welding, TIG welding. Drum and other main pressure parts
adopt CNC automatic welding, all of the welding 100% passed
penetrant inspection.
Factory assurance
1. One year parts warranty,life-long service
2. Spare parts available at ex-factory price
3. Different voltage available
4. 100% tested before delivery
5. Engineer on-site instruction of installation and commissioning
available.
6. After-sale services: Assist clients to prepare for the first
construction, and also can arrange engineer on-site instruction of
installation and commissioning. Install and debug the equipment;
Train the first-line operators; Examine the equipment;