Automatic Yaw Type NC Sheet Metal Coil Feeder Precision Stamping Processing

Feeder precision feeding, stamping processing automatic feeder, yaw type NC feeder

The yaw type NC servo feeder is developed on the basis of the original ordinary NC feeder. The automatic feeding machine for stamping processing optimized by special typesetting method can realize multiple yaw to save raw materials and improve production efficiency.

Pivot NC servo feeding range:

It is mainly used in the processing of stamping products such as screens, caps, motor stators and rotors, hardware products, round sheets, and special-shaped sheets, especially for the production of wafer materials.

Pivot NC servo feeding features:

1. It adopts 7-inch super large Mitsubishi touch screen control, and has dual control modes of buttons and touch screens. The screen indication is clear and clear, and the operation is very simple.

2. The PLC operation panel is in the independent electric box, which completely avoids the negative impact of the punch vibration on the accuracy of the feeder and ensures high-precision feeding.

3. The yaw type NC feeder is equipped with a memory function. When the feeder is suddenly powered off or the production needs to be interrupted due to special circumstances, the program does not need to be re-measured when restarting the production. Just press the reset button to re-operate. Streamlined operational procedures.

4. It has two kinds of relaxation methods: relaxing at both ends and relaxing one by one. It can realize multi-purpose for one machine and is suitable for different stamping processing.

5. configure the production value setting function, simple to achieve quantitative production, high degree of automation, operation is extremely simple.

6. feeding speed setting is simple, acceleration and deceleration can be adjusted freely on the touch screen.

7. Advanced automatic diagnosis system, when the operation is faulty, the system can self-diagnose and display the error information in detail.

8. It has two feeding modes of inching and continuous feeding. It can be mixed operation, X-axis (single-axis) can work independently, or X-axis and Y-axis can be linked together, and it can also be alternately fed in two axes. Saving material costs.

9. High precision: In the continuous feeding process, the minimum distance between the sides and the side can be set within 0.4mm, and the movement error of each time can be guaranteed within ±0.05mm.

10. Material reference points can be set for easy operation.

11. when the belt is used, no gap is produced.

12. During the feeding process, the material is automatically repositioned, one-button operation, convenient and fast.

13. Equipped with internal software limit function, with over-travel and overload protection, which greatly reduces the production failure.

Specifications:

Straightening Performance:

Products:

RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry，and investment less.

Customer case

Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.

And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.

hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.

RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.

Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.

At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.

Why choose us?

1^st,We have a high level of technical research and development team;

2^nd,We can provide the design and planning of the whole plant to realize the turnkey project;

3^rd, our philosophy: quality is the social responsibility;

4^th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;

5^th,We have a highly effective after-sales service team and get customer approval.