Automatic Adjustment HDMI Fiber Optic Extender FC 20km With IR Control

Features

Support HDMI 1.3/HDCP1.1 & 1.2

It supports fiber transmission at the same time.

Support point to point, point to multipoint, and transmission mode

to support infrared extension, you can use the infrared remote control to control the set-top box or blue light at the receiving site.

Pure hardware design, plug and play, no additional software needs to be installed.

install

Use the HDMI line to connect the HDMI signal source to the 8110HT and 8110HR output to the display device.

Connects a pair of SC connectors of a pair of fiber optic jumpers to the SC port of the video transmission device. It is noted that both ends of the same fiber must be connected to the TX and RX ports of the optical fiber transceiver interface, and the other end must be interconnected, otherwise the fiber can not connect.

Configure infrared back control function, the infrared receiving head is connected with HDMI TX, HDMI RX. and access the infrared emission head will launch its head at the infrared receiving port need to control equipment.

Equipment electrified

At this time, the POWER light of the video transmission equipment is bright, and the other lights are first flashing in sequence according to the order of self inspection. When the STA lights flicker, the device transmits video.

Who We Are?

Shenzhen Newbridge Communication Equipment Co. Ltd (short title: Newbridge) is one High-technology manufacturer and found in 2004, located in Shenzhen .Our product is controlled according to the standard of ISO9001 and FCC and CE etc. we have been absorbed in developing, designing, manufacturing and selling cctv security products and Optical network communication e.g. HD-SDI cameras, HD-SDI transmission, video fiber transmission, Ethernet media converter etc.

About Our Factory

Newbridge based on Shenzhen is certified by ISO9001:2000, we have been founde in 2004 .We have three product lines, and the first line is SMT line (surface Mounting Technology). there are three sets SMT high-speed device , two sets full automatic screen printer and one sets reflow Soldering in this line .daily output is up to 20 million dots per 12 hours. The second line is Plug-in lines. There is one sets Wave Soldering, Shearing machine and full function test equipment. The third line is assembly line, the last heat aging and test are the strictest.