Product Details
Large size DN50 RF type IC card Prepaid Water Meters for water
utility billing, Multi jet water meter type
The large size Smart prepaid water meter, is up to DN300 for
commercial and industrial water supply billing purpose, it adopts a
contactless IC card to store water volume and monitor water
consumption. Customers purchase water volume at vending points and
upload water volume by swiping his IC card on the induction area of
installed water meter inside or outside home to activate valve,
which will open automatically to supply water.
During the period of water supply, the built-in microcomputer of
water meter will automatically check and subtract the used water
volume. Water meter has twice alarm function, when the purchased
water volume reaches to alarm volume, water meter will close valve
and stop water supply. Customer can resume water supply by swiping
his IC card on water meter. When the remain water volume is used
up, water meter will stop water supply completely and the customer
needs to charge his IC card again.
Available in sizes 15mm to 25 mm with nominal flow rates of Qn
1.5m³/h to Qn 15m³/h. It's for cold water volumetric measurement,
or hot water up to 90 ℃.
Functions
- Prepaid, avoid owing and consciously refuse to pay bill
- High accuracy of measurement
- Environmental protection material and can guarantee water quality
for drinking
- Programmable tariff set
- Waterproof, moisture-proof and anti-attack
- Adopt replaceable batteries, change batteries by customer
themselves, more convenient.
Pressure curve
Flow curve
Key features
- Contactless IC card (RF card) technique: adopt our company’s patent
technique of RF card, transmitting data by wireless way,
waterproof, moisture-proof and anti-attack
- Electric floating ball valve technique: adopt electric ball valve
technique, work reliably and lower loss of pressure
- Totally sealed design: all the circuits are sealed by high
performance casting glue, so there is no exposed electrode, and can
be used in moist environment
- Anti-attack of strong electricity or magnetism: water meter will
close valve automatically when being attacked by strong electricity
or magnetism
- Micro-computer and microstorage technique: high integrated and high
reliability
Product data sheet
Port size (DN) | 15 mm | 20 mm | 25mm |
Measure unit | 0.1 m³ |
Measure range ratio (Q3/Q1) | 80 |
Overload flow (Q4) | 3.125 m³/h | 5 m³/h | 7.875 m³/h |
Constant flow (Q3) | 2.5 m³/h | 4 m³/h | 6.3 m³/h |
Demarcation flow (Q2) | 0.05 m³/h | 0.08 m³/h | 0.126 m³/h |
Miniumal flow (Q1) | 0.0313 m³/h | 0.05 m³/h | 0.0788 m³/h |
Minmum reading | 0.0001 m³ |
Maximum reading | 99999 m³ |
Alarm | automatic valve close |
Working temperature | 0.1℃~30℃ (cold water meter) |
0.1℃~90℃ (hot water meter) |
Flow sensitivity level | Up zone: U10 Down zone: D5 |
Pressure level | △P63 |
Working pressure rating | 0.03 Mpa - 1.0 Mpa |
EMC | E1 |
Environment safety level | B |
Installation
- The installation of water meter meets the installation requirements
of ISO4064-2:2005
- The caliber of water meter shall correspond with caliber of pipes
and the used flow rate is less than or close to the permanent
flowrate. The installation place should avoid exposure, flooding,
freeze and pollution, and convenient for installing, removing and
reading data.
- The water meter shall be installed horizontally (display surface is
upward).
- The sands and stones and other sundries in the pipelines shall be
cleared.
- The arrow on the water meter should be the same as the water flow
in the pipeline.
- If the water meter is installed on the inlet of the boiler, it is
better to install inverted valve on the outlet of water to prevent
the return current of hot water and steam will damage the water
meter.
Competitive Advantage:
- Compliance to international standards: ISO4064 / GBT778 /
Q/320700JR05-2003
- Strict process control
- Advanced calibration equipment
- Engineer team
Production line
Company Profile
Shanghai I Fluid Technology Co., Ltd, a technique based company. We
focus on the deployment , installation and management system of
smart metering and smart grid in all utility sectors, include but
not limited to water, heat, gas and electricity.
To adapt to the global environment protection trends, and China
government policy, China put the green energy application and EIA
at their first place. We do our best contribution to the government
energy saving policy.
We put emphasis on central air conditioning system, energy
distribution system in separated areas, green energy application in
commercial buildings, municipal water / gas / heat supply, sewage
discharge monitoring, and many other industrial applications.
Adhere to the principle of “ low carbon energy, build future”, we
aim to give solution to take the best avail of natural resources,
improve energy efficiency, reduce energy consumption. Through more
renewable energy, reasonable energy store technique, and minimize
energy demands, we help our clients to build an intelligent low
carbon energy network. Build the optimized electricity, heat, water
and gas supply and demands system, finally to realize the LOW to
ZERO energy system.
Over tens of years developing, we design and manufacture a complete
set of energy relating products: central air condition with
variable ventilation and ventilate at low temperature, flexible
central air conditioning, cooling store capacitor, AMR/AMI,
metering and level products.