Liquid Gas Pressure Level Transmitter , Anti Corrosion Magnetic Level Transmitter

Liquid and gas level pressure transmitter, anti corrosion type Level transmitter for acid or alkali liquid 2088

Brief introduction

The anticorrosion type level transmitter, has silicon pressure resistance and oil filled chips, suitable for acid, alkali and other type of corrosion liquid level transmitter.

Key features

• Wide measurement range, high accuracy, low energy consumption
• Non-contacting measurement method, no driven parts;
• Measurement of liquid and solid;
• Scientific echo tracing algorithm;
• Interior temperature compensation;

Functions

• Liquid and material level measurement
• distance measurement
• storage content indication

Technical data
1.specification of connection mouth: G2”
2.specification of inlet mouth: M20*P1.5
3.measurement medium: liquid, powder
4.working pressure(V): 20～36
5.voltage drop(V): <3.5
6.reverse power protection: yes
7.overload protection: yes
8.temperature compensation: yes
9.automatic efficiency calibration: yes
10.watchdog: yes
11.current drain(mA): 50
12.accuracy/deviation(%): ±0.1%
13.minimum resolution ratio(mm): 1
14.output response time(s): 1.5
15.output form: three-wire, 4~20mA output
16.maximum output load(mA): 400
17.analog output load(ohm): 4～20mA, Max(Ub-10V)*50
18.switch output characteristics: ①normally open and close②PNP or NPN output③SP and RP point
19.environment temperature(℃): -40~80
20.storage temperature(℃): -40~80
21.insulation resistance(M ): >100(1500VDC)
22.shell material: aluminium alloy, ABS,PA+GF
22.transducer frequency(KHz): 50
23.launching angle: <15℃
24.range(m):0.3~10
25.dead zone(cm): ≤30

Model selection of level transmitter and controller

Shanghai I Fluid Technology Co., Ltd, a technique based company. We focus on the deployment , installation and management system of smart metering and smart grid in all utility sectors, include but not limited to water, heat, gas and electricity.

To adapt to the global environment protection trends, and China government policy, China put the green energy application and EIA at their first place. We do our best contribution to the government energy saving policy.

We put emphasis on central air conditioning system, energy distribution system in separated areas, green energy application in commercial buildings, municipal water / gas / heat supply, sewage discharge monitoring, and many other industrial applications. Adhere to the principle of “ low carbon energy, build future”, we aim to give solution to take the best avail of natural resources, improve energy efficiency, reduce energy consumption. Through more renewable energy, reasonable energy store technique, and minimize energy demands, we help our clients to build an intelligent low carbon energy network. Build the optimized electricity, heat, water and gas supply and demands system, finally to realize the LOW to ZERO energy system.

Over tens of years developing, we design and manufacture a complete set of energy relating products: central air condition with variable ventilation and ventilate at low temperature, flexible central air conditioning, cooling store capacitor, AMR/AMI, metering and level products.