Product Details
Paddle wheel flow meter for water utility by electromagnetic flow
meter Modbus/RS485/Bacnet/4-20ma
Remote display Electromagnetic flowmeter
Electromagnetic flowmeter is a new type of flow measurement
instrument.
Based on the electromagnetic induction principle, it measures
conductive liquid flow according to electromotive force induced by
the conducting flow going through the applied magnetic field.
It is used to measure the conductive liquid flow of tap water, steel, petroleum, chemical, electric power, industry, water
conservancy and other departments, and can also measure the acid, alkali, salt and other corrosive conductive liquid.
Applications
For the UVZ differential pressure flowmeterCompact Orifice
Flowmeter
Oil and Gas Production
Refining
Petrochemical
Power
Utilities
Pulp and Paper
Natural Gas
Key features
- Maximal uptime with dual-compartment transmitter housing that
isolates electronics from moisture and contamination
- Robust structure, fully welded construction designed to withstand
sustained vibration
- Confirm meter calibration without interrupting the process using
continuous meter verification
- Perform easy repairs in the field without the need to replace the
entire meter with a replaceable terminal block
- Advanced diagnostic capabilities and printed reports verify meter
performance for compliance with regulatory agencies
- Simplify configuration and accessibility with an easy-to-use Local
Operator Interface
Accuracy
Pipe Dia (mm) | Velocity (m/s) | Accuracy |
3-20 | <0.3 | + 0.25% FS |
0.3-1 | + 1.0% Readout |
1-15 | + 0.25% Readout |
25-600 | 0.1-0.3 | + 0.25% FS |
0.3-1 | + 0.5% Readout |
1-15 | + 0.3% Readout |
700-3000 | <0.3 | + 0.25% FS |
0.3-1 | + 1.0% Readout |
1-15 | + 0.25% Readout |
Technical data
Product name | Electromagnetic flowmeter |
Product type | Local|compact display | Remote display | Signal converter |
Model | IYF-E | IYF-F | IRT |
Pipe Diameter (mm) | DN10-DN2000 |
Power supply | 100-240 VAC / 18-36 VDC |
Accuracy | + 0.5% | + 0.5% | + 0.5% |
Power consumption | <6w | <6w | <6w |
Enclosure rating | IP65 | IP68 | IP65 |
Liquid temperature | -25-120℃ | -25-120℃ | -25-120℃ |
Ambient temperature | -25-50℃ | -25-50℃ | -25-50℃ |
Relative humidity | 10-90% | 10-90% | 10-90% |
Meter ratio | 1:100 | 1:100 | 1:100 |
Flow direction | Bi-direction flow | Bi-direction flow | Bi-direction flow |
Communication | RS485 / Bacnet | RS485 / Bacnet | RS485 / Bacnet |
Signal Output | 4-20mA/Pulse/Frequency | 4-20mA/Pulse/Frequency | 4-20mA/Pulse/Frequency |
Manufacture process
Packing
Company Profile
Shanghai I Fluid Technology Co., Ltd, a technique based company. We
focus on the deployment , installation and management system of
smart metering and smart grid in all utility sectors, include but
not limited to water, heat, gas and electricity.
To adapt to the global environment protection trends, and China
government policy, China put the green energy application and EIA
at their first place. We do our best contribution to the government
energy saving policy.
We put emphasis on central air conditioning system, energy
distribution system in separated areas, green energy application in
commercial buildings, municipal water / gas / heat supply, sewage
discharge monitoring, and many other industrial applications.
Adhere to the principle of “ low carbon energy, build future”, we
aim to give solution to take the best avail of natural resources,
improve energy efficiency, reduce energy consumption. Through more
renewable energy, reasonable energy store technique, and minimize
energy demands, we help our clients to build an intelligent low
carbon energy network. Build the optimized electricity, heat, water
and gas supply and demands system, finally to realize the LOW to
ZERO energy system.
Over tens of years developing, we design and manufacture a complete
set of energy relating products: central air condition with
variable ventilation and ventilate at low temperature, flexible
central air conditioning, cooling store capacitor, AMR/AMI,
metering and level products.