

Add to Cart
Evaporated milk canned cold glue labeling machine tin can labeling machine wet glue labeling machine
Application:
This is automatic canned labeling machine , this machine is suitable for metal tin cans such as canned milk, paste food in tin can , canned fruit , beef food tin, canned fish,cat food tin can etc. it's widely used in the food industry, beverage, pharmaceutical, cosmetic, chemical, agro-industrial market.
Features:
1.This machine is used for metal tin labeling. The tin rolled into the machine, by the pressure in the tin rolling on the belt drive, when the tin pass through the hot melt adhesive points, can be coated with a hot melt adhesive, along with the moving of tin, the tin part with glue will press the front of the label and stick the label on, and began to be rolled in on the tin. At the same time, the label end was glued by gluing mechanism. With the tin moving on, the label has been affixed to the tin on a roll. Then get out of the machine driven by rolling belt.
2.This machine has alternately label supply mechanism, no need to stop the machine when add label.
3.The end glue supply is controlled by tin. It will not supply glue if without tin.
4.Machines using frequency control can be adjusted according to production requirement.
5.The machine is only to change a few parts for replacing different size tin, the label adhesive only in
two ends, with less glue and low cost.
Model | HG-01 |
Capacity(BPM) | 200-500 |
Diameter of cans | 45-114mm |
Height of cans | 30-270mm |
Size of label (L*H) | L160*370 mm W:25-236 mm |
Vertical error | ±1 |
Labeling rate | ≥99.8% |
Power supply | 380V three-phase,50HZ |
Motor power | 2.62KW |
Gas consumption | 2-4kgs/Min |
Glue | Hot melt glue +Cold Glue |
Net weight | 750KG |
Machine details:
Conveyor belt | Turning table |
Connecting conveyor belt | Labeling machine |
Conveyor belt (after labeling ) | Full labeling machine line |