LAN PLC Controller Temperature Humidity Alternate Environmental Test Chamber 1/3 Loading Ratio
Brand Name:iqualitrol
Model Number:QTH-600D
Minimum Order Quantity:1 set
Delivery Time:30 Working Days
Payment Terms:T/T
Supply Ability:5 Sets per Month
Contact Now
Add to Cart
Site Member
Location:
Dongguan Guangdong China
Address:
No. 88, Jiaolian Yiheng Road, Wanjiang district, DongGuan, China (523046)
Supplier`s last login times:
within 1 hours
Product Details
Company Profile
Product Details
Temperature Humidity Alternate Environmental Test Chamber with PID Touch Screen Controller
Loading Ratio of iqualitrol Climate Test Chamber:
The suggested ratio, for many tests, is about 1:3 for the volume occupied to volume free within the chamber. ⅓ product to ⅔ empty space around the product ensures adequate airflow to the test sample and makes sure your test is conducted properly. Items that allow for airflow (such as a computer chassis with plenty of air vents) can take up a larger percentage of the test volume.
Whereas, sand, dust, and high altitude chambers do not need a 1:3 ratio of product volume and empty space. The airspeed inside the chamber is already very high for the products and makes a 1:3 ratio unnecessary. These chambers should be just slightly bigger than your test product.
Technical Specifications:
| The test conditions for device performance parameters are: Air cooled ambient temperature at 25 ºC, water temperature of water cooling cycle is 25 ºC, no-load (no load) | ||||||
| Category | Model | QTH-100C/D | QTH-200C/D | QTH-330C/D | QTH-600C/D | QTH-1000C/D |
Internal size(W*H*D) mm | 500×500 ×400 | 580×750 ×450 | 580×750 ×760 | 800×950 ×800 | 1100×950 ×950 | |
External size(W*H*D) mm | 750×1650 ×1100 | 880×1730 ×1360 | 880×1730 ×1570 | 1100×1950 ×1700 | 1400×2000 ×2105 | |
| Main perfor-mance | Temperature range | C:-40C~+150C, D:-70C~+150C customize | ||||
| Temperature fluctuation | ±0.5ºC | |||||
| Temperature uniformity | ±2.0ºC (deviation: ±2.0ºC) | |||||
| Humidity range | 20%~98%(Dry sphere temperature range+10ºC~+90ºC) | |||||
| Humidity fluctuation | ±1.5% | |||||
| Humidity uniformity | <75% RH /≤±5%RH; >75% RH /≤±3%RH | |||||
| Heating performance | Average about 3 degrees per minute, no load. | |||||
| Cooling performance | C:from +20ºC to -40ºC average about 1 degrees per minute, no load | |||||
| D:from +20ºC to -70ºC average about 1 degrees per minute, no load | ||||||
| Operating ambient temperature | Environmental temperature conditions for equipment functioning normally:+5ºC~35ºC | |||||
| Structure | Outer box material | Steel plate lacquer-full computer white | ||||
| Inner box material | SUS 304#(or 316#) mirror stainless steel | |||||
| Insulation process | Outer rigid polyurethane foaming+Inner glass fiber cotton | |||||
| System | Refrigeration mode | C: Mechanical vapor compression refrigeration-Single stage; Cooling mode optional: air cooling (standard) / water cooling. | ||||
D: Mechanical vapor compression refrigeration-overlapping type; Cooling mode optional air cooling (standard) / water cooling | ||||||
| Refrigeration compressor | Fully enclosed piston type/rotary compressor (Low noise / environmental protection) | |||||
| Cryogen | C:Environmental coolant R404A D:Environmental coolant R404A+R23 | |||||
| Circulating fan | High-temperature induction motor+Aluminum alloy centrifugal wind blade | |||||
| Heater | Reliable stainless steel regenerator | |||||
| humidifier | Built-in stainless steel anti-corrosive heating pipe, water plate humidification (Convenient and clean, low water consumption) | |||||
| Control system | control method | Solidified write PLC control system | ||||
| display screen | 7-inch TFT true color liquid crystal display with a resolution of 800*480; hand touch input | |||||
| Operation mode | Values and programs | |||||
| Program capacity | 120 group programs, each program can be set up 100 times | |||||
| Document storage | USB interface, easy to import or export internal parameters of programs and devices ; curve data can be derived from USB disk | |||||
| Communication | Optional LAN Network Interface, it is convenient for remote connection control and fault diagnosis. | |||||
| Water supply | Water supply mode | Pump lift | ||||
| Water box | 5-liter / 20-liter food-grade PE tank, removable for cleaning | |||||
| Water quality requirements | Resistance for water used for humidification≥500mΩ | |||||
| Parts | Standard configuration | Diameter 100mm test hole and soft plug 2 piece; stainless steel riser with good air permeability 2 piece; movable casters with fixed mats 4 piece, observation window 1 piece | ||||
| Protection | Standard configuration | Power over-voltage overload protection; power leakage protection switch; test product over temperature protection (independent); compressor overload high - voltage protection; heater over-temperature protection; humidifier dry burning protection; low water level protection ; controller self-diagnosis fault picture display. | ||||
| Others | Power Supply | 100L uniphase220V; others 3 phase 4 line380V 50Hz ±10%+protective earth wire | ||||
| Single-phase maximum current A | 18A | 18A | 18A | 22A | 26A | |
| Power rating KW | 4KW | 7KW | 7KW | 10KW | 10KW | |
| Nominal weight KG | 180 | 280 | 320 | 500 | 700 | |
Brief Introduction:
Temperature and humidity test chamber can simulate different
environment condition. It's appropriate for testing material
performance, such as resist heat, resist dry,resist humidity and
resist cold. That can define performance of material. It is simple
to operate and program easy to edit. It can show the set values and
operative time.
Features:
1, Chamber exterior material is stainless steel with environmentally baking paint resists corrosion and provides impact resistance. Interior material is SUS 304# stainless steel , mirror finished with excellent heat resistance and easy to clean.
2, Controller imported LCD display screen can be displayed measuring values and setting the value and time.
3, Safety relay connection is provided to protect your device under test by removing power to it when the chamber is not running.
4, RS-232 communications is for computer connection, programming can be set on computer by software, monitor testing process and automatically execute power on/off functions.
5, Fog-free viewing window and interior light makes viewing workspace freely and observe the test under best conditions.
6, Adjustable product shelf slides out for easier product access. Shelf design is non-tipping and supports large product loads.
7, Left and right side of chamber with diameter 100mm cable port for power-on test.
8, Optional electronic humidity sensor is used on all test chambers for accuracy and minimal maintenance.
9,The French Tecumseh brand is used for the circulation system of the compressor, more effective removal of oil between the condenser and the capillary and use environmentally refrigerants ( R23, R404, R507).
10.Completely independent system separate for testing in high temperature, low temperature and constant temperature & humidity environment.
LAN PLC Controller Temperature Humidity Alternate Environmental Test Chamber 1/3 Loading Ratio
Inquiry Cart
0