PLC Control Straight Line Drawing Machine LZ-N/1200

LZ-N/1200 Straight Line Drawing Machine

Straight Line Drawing Machine

1.Type :LZ-n/1200

2. Technical parameters

2.1. Drawing Block diameter and number of blocks: φ1200mm ,9 blocks.

2.2. Inlet wire diameter: φ14-φ9, outlet diameter:φ9-φ3.

2.3. Max compression ratio 21%, Min.15％.

2.4. Designed speed 8m/s, working speed 5-7m/s;Pay-off speed ~ 2 m/s.

2.5. Inlet wire strength: less than 1250MPa Outlet wire strength 1960 MPa

2.6. Cooling type:

Drawing Block cooling: using forced circulation water and independent air cooling, with water flow display; water flow sensor, this sensor switches off the drawing machine when the water pressure and water flow drops;Drawing Block temperature: max 30°C

Die box cooling: close-type water cooling, with water flow display

2.7. Start & normal stop time: 5-30s; emergency stop: 3s

2.8. Equiped with synchronizing pay-off and take-up machine ;

2.9. Spool size (in take-up spooler):

Ø 500(barrel) X 964(overall width) X Ø 1250(flange), inner dia. Ø120, spool weight: 3500 kg

2.10. Each group drawing machine can be jog running or link running;

2.11. With corrector, and meter counter; counter accuracy 0.1％

3. Main parts

3.1. Pay-off stand:

3.2 Wire drawing unit

3.3 Drawing machine rack

3.4 Reducer gear box

3.5 Drawing block

3.6 Cooling fan

3.7. Dies box

3.8 Straightener

3.9 Take-up machine

4. Detection and calculation

1)The drawing speed of each roller can be defected and displayed, the line speed is displayed in digital;

2)The length of the finished drawing wire can be measured and displayed, the expected wire length and the pre-warning can be set in advance to achieve early warning and stop control at the expected value.

3)The voltmeter is installed on the electric control cabinet, every ammeter and other measuring instruments are installed on the main control cabinet

4)Work time of the device can be measured and calculated , the records be installed in the control cabinet door.

Anhui Herrman Machinery Co Ltd was found in 2010. It is 100% Private Owned by Anhui Herrman Group which was established in 1994. Our Target Goal is to serve customer with EPC business on Cable Production Projects. We have perfect Team on Engineering Design, OEM Production and High Quality Contractor. We have very good experience on supplying all kinds of cable making machineries which are related

to Power cable, control cable, insulated wires & Optical Fiber cable with Turn Key projects as well.

We have good reputations in 36 countries such as USA, Turkey, Czech Republic, Korea & India, Egypt, etc. . We supply not only High Quality machinery, but also good maintenance service to supply spare parts and engineering service. To achieve good satisfaction, you are mostly welcome to visit our factory and interview good machines which are running in China & other countries.