Heavy Duty Push Back Pallet Rack With Large Storage Capacity Eco Friendly

Heavy Duty Push Back Pallet Rack With Large Storage Capacity Eco Friendly

How Push back pallet rack Work

The push back pallet rack has a certain slope, about 3 °. It uses its own weight to store goods. The overall structure adopts the "clip" principle. The pallets are placed on the carrying cart and pushed into the rack in turn. The forklift does not need to enter the rack, and the operation method is exactly the same as that of ordinary racks. Since multiple pallet positions can be designed in the rack depth direction, the space utilization of the push-back pallet rack is higher than that of ordinary rack. Both safety and operating efficiency are much higher than through racks.

How to Use it

1. Put the goods on cart from the front and push in.
2. Goods stored later will put the former goods forward, carts connected together.
3. When the front goods are taken away, inside cart will slide down automatically.

Dehumidifier Features

• First-in-last-out mode

• Large storage capacity and extremely high space utilization

• Suitable for multiple varieties and large quantities of goods

• Suitable for situations such as freezer that need to greatly improve space utilization

1. When the number of pallets of a certain product is large and “first in, first out” is not required, the working procedure can be simplified and the benefits are extremely significant;
2. It can shorten the picking time, no special handling equipment required;
3. Due to the large storage area and fewer channels, space utilization and productivity are high;
4. It can avoid high-density storage shelves often caused by cargo damage during loading and unloading operations.

Product detail

Cart - Bearings – Rails – Anti-Slip Steel – Rail Bracket – Front Stopper

function

Push-back rack, also known as push-in rack, are connected by multi-layer carts between the front and rear beams. Stacked goods are pushed into the carts from the outside, and the stored goods will push the original goods into it. It is usually used in places where the storage space is extremely limited, but the storage capacity must be increased or the time required for the goods must be increased.

The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.

The press-in racking system has higher requirements for the manufacturing accuracy of the rack. Because the cooperation between the pallet cart and the guide rail is high, the manufacturing and installation accuracy is strict. Failure to do so will cause the racking system to run poorly and affect work effectiveness.

The cost of press-in rack is higher, which is directly proportional to its value. Its warehouse utilization rate reaches about 80%, and the space utilization rate of the warehouse can be improved.

It is more than 30% high, easy to access and flexible, and is the rack with the highest storage efficiency.

application

1. Push-back rack are composed of typical structural parts such as pallet carts. Pallet carts have flow characteristics. Goods are specified to enter and exit at one end of the rack, and follow the order of advanced back-out;
2. When storing and transporting goods, the forklift works only at the lower end of the rack aisle, and does not need to enter the rack goods storage aisle. Such shelves have the typical characteristics of high storage density and fast storage and transportation speed;
3. It is usually used for storage places that are extremely limited, but it must be used in places where the storage requirements are not high, such as increasing storage capacity or requiring time for the goods.

Design Features

The track of the press-in rack has a certain slope, about 3 °. It uses the weight of the goods, and the pallet goods are specified for single-end storage. The total depth of this kind of rack should not be too deep, generally within the depth of 6 pallets, because the carts are embedded in each other, so they take up some space. The weight of a single pallet is generally within 1500kg, and the rack height is generally below 6m.

Foshan Jiabao Shelf Manufacturing Co., Ltd, which was established in 1988 is with large scale, strong ability, comprehensive administrative system, advanced facilities and technique.

We are specialized in designing, manufacturing and selling racks as we have several teams of professional technicians, sales representatives and administrators. We are strict with staffs, production and quality control for the whole process, from choosing material to delivering goods.

We adopt good powder and advanced automatic production line for finish. Because of our good quality and reputation, so far we earn trust and belief of many customers for a long term. Our company aims to develop step by step under leading concept “Quality for surviving, sincerity for developing”.

With about 20 years’ development, our products are more and more diversified. At present our main products include light-duty storage rack, supermarket shelf, grocery rack, CD shelf, book shelf, heavy-duty storage rack, lofting racks, corridor racks, storage cage, shopping trolley, promotion cart, cash counter and a series of supermarket facilities. Our products are popular both at home and aboard, and enjoying good fame among coteries.

We are outstanding, as we are professional. To shake hands with Jiabao is to be friends forever.