Mid - Frequency Magnetron Sputtering Coating Machine, MF Sputtering Coating Plant, Sputtering Vacuum Deposition System

Mid-Frequency Magnetron Sputtering Coating Machine / MF Sputtering System

Magnetron Sputtering Vacuum Coating is a type of PVD Ion Plating surface treatment menthod. It can be used for the production of conducting or non conducting films, on many types materials: metals, glass, ceramic, plastic, metal alloy. The sputtering deposition concept: the coating material (target, also named cathode) and the work pieces (substrates, also called anode) are placed into the vacuum chamber and the pressure is reduced. Sputtering is initiated by placing the target under a voltage differintial and introducing Argon gas that form argon ions (glow discharge). The argon ions accelerate toward the process target and displace target atoms. These sputtering atoms are then condensed onto the substrate and form very thin and high uniformity layer. Various colors can be achieved by introducing reactive gases like, nitrogen, oxgen, or acetylene into hte sputter gass during coating process.

Magnetron Sputtering Models: DC Sputtering, MF Sputtering, RF Sputtering

What is MF Sputtering?

Compared with DC and RF sputtering, Mid-Frequency sputtering has become a main thin film sputtering technique for mass production of coating, particularly for the film deposition of dielectric and non-conductive film coatings on surfaces such as optical coatings, solar panels, multiple layers, composite material film etc.

It is replacing RF sputtering due to it operated with kHz rather than MHz for a much faster deposition rate and also can avoid the Target poisoning during compound thin film deposition like DC.

MF sputtering targets always existed with two-sets. Two cathodes are used with an AC current switched back and forth between them which cleans the target surface with each reversal to reduce the charge build up on dielectrics that leads to arcing which can spew droplets into the plasma and prevent uniform thin film growth--- which is what we called Target Poisoning.

MF Sputtering System Performance

1. Ultimate Vacuum Pressure: better than 5.0×10^-6 Torr.

2. Operating Vacuum Pressure: 1.0×10^-4 Torr.

3. Pumpingdown Time: from 1 atm to 1.0×10^-4 Torr≤ 3 minutes ( room temperature, dry, clean and empty chamber)

4. Metalizing material (sputtering + Arc evaporation): Ni, Cu, Ag, Au, Ti, Zr, Cr, TiN, TiC, TiAlN, CrN, CrC, etc.

5. Operating Model: Full Automatically /Semi-Auto/ Manually

MF Sputtering System Structure

The vacuum coating machine contains key completed system listed below:

1. Vacuum Chamber

2. Rouhging Vacuum Pumping System (Backing Pump Package)

3. High Vacuum Pumping System ( Magnetically Suspension Molecular Pump)

4. Electrical Control and Operation System

5. Auxiliarry Facility System (Sub System)

6. Deposition System: MF sputtering cathode, MF power supply, Bias Power Supply Ion source for optional

MF Sputtering System RTSP1212-MF Specifications

We have more models for your selection!

Please contact us for more specifications, Royal Technology is honored to provide you total coating solutions.

Shanghai Royal Technology Inc. was established in 2006, a worldwide supplier of high quality vacuum equipment with key locations around the globe. Research and Development technology are supported by specialized engineers in the United States and China. High-tech machine manufacturing facilities are located in Shanghai and our global network of service centers ensure fast customer service response in key locations.

Shanghai Royal Technology has a strong drive for innovative design and high quality components selection, combined with an extra careful assembly process and a topnotch team of talented technicians and inventors, which enable us to offer turn-key coating solutions with high standard vacuum equipment, meeting and often exceeding Western standard. We are determined to serve the market worldwide in various industries such as:

Consumer electronics, automotive, renewable energy, architecture, Nano and bio-medical materials.

RTAS model,the arc and sputtering integrated series equipment can produce highly reflective black and bronze films specifically for high quality decorative coatings.

RTSP1200-FCEV, It is a sputtering system with PECVD process to deposit thin film on hydrogen fuel cell power modules. Fuel Cell Vehicles is the newest technology for the next generation of environmentally friendly cars. The main advantage and technological progress compared to commonly used batteries like dry cell need to undergo a recurring recharging process, but hydrogen fuel cell power modules only require Hydrogen and Oxygen reaction to generate power for driving.

RTSP1200-DPC,This coating system is exclusively used for the DPC (Direct Plating Copper) ceramic substrates process. The DPC ceramic substrates are widely used in various applications: for instance in high brightness LED to increase the longevity because of its high heat radiation performance, Semiconductor equipment, in microwave wireless communication, military electronics, various sensor substrates, aerospace, railway transportation, electricity power and much more.

RT-CsI950, Evaporation coating plant is applied to CsI film deposition for X-Ray Imaging devices. It is an advanced technique to evaporate CsI on the screen to create high quality images. The high-resolution performance allows this application to be extremely efficient and disruptive in the medical instrument, nuclear energy industry, security checking and inspection, high energy physics subjects and more.

Shanghai Royal Technology also successfully designed and developed Cube and Cylinder model large size Aluminum Vacuum Metalizing System which is used for Automotive Logo Board Coating.

Live Locally, Think Globally is our Vision. We live our day to day business by the concept of “Integrity and Solidarity”, always striving for innovation to achieve win-win situations in our ecosystem of worldwide partners. As pioneers in the Vacuum Coating Equipment Industry, we never relied on previous accomplishments, but we continuously tried to explore the ever changing world of the Vacuum Coating Industry to always create optimal economic, social and environmental benefits for our customers.

ROYAL TECHNOLOGY'S CULTURE

ROYAL's Vision: to be the worldwide famous brand supplier of providing total solutions to customers requirement.

ROYAL' Mission: protects the environment, saves our blue planet ; to improve labors tough working environment, enhance work efficiency, completely help owners to reduce production cost.

ROYAL's Philosophy: human-oriented, honest, innovative and make the greatest contribution to society.

ROYAL's Value: innovation, advanced technology’s R&D, serving China and worldwide's manufacturing industries.

ROYAL's Service: ONE-STOP service, with excellent technology and products, professional dedication to serve our customers.