Fanuc EMH iPendant Teach Pendant Controller A05B-2518-C202 Series A05B-2518 New
Brand Name:Fanuc
Certification:CE
Model Number:A05B-2518-C202
Minimum Order Quantity:1
Delivery Time:3-5days
Payment Terms:T/T, Western Union,Paypal
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Fanuc EMH iPendant Teach Pendant Controller A05B-2518-C202 Series A05B-2518 New
Manufactured by FANUC
- FANUC ROBOTICS
- FANUC
- FANUC ROBOTICS
- A05B-2518-C202#EMH
- A05B2518C202EMH
- DISCONTINUED BY MANUFACTURER
- TEACH PENDANT
- IPENDANT ROBOT CONTROLLER W/O TP DUAL/ENG/MAT HANDLING
- MATERIAL HANDLING TEACH PENDANT
. Make NC PRM 960.3 (PMN) = 0 (Enables PMM function).
2. Select where parameters are to be saved (to save to memory card
on i series controls make PRM 960.2 (MD2) = 0 and PRM 960.1 (MD1) =
1, to save as a part program make PRM 960.1 = 0).
3. Set parameter 8760 to the program number you want the parameters
to be stored as. Note 1.
4. Press the SYSTEM button then the RIGHT CHAPTER button until the
Power Motion Manager screen is displayed.
5. Press the SYSTEM soft key.
6. Press the PARAM soft key.
7. Press the OPRT soft key.
8. Press the RIGHT CHAPTER button. READ and PUNCH soft keys will be
displayed.
9. Select EDIT mode.
10. To save parameters from Beta drive to CNC press the READ soft
key, press the ALL soft key then the EXEC soft key.
11. To restore the parameters from the CNC to the Beta drive press
the PUNCH soft key, press the ALL soft key then the EXEC soft key.
Parameter 960.0 (SLV) determines how many slaves are displayed on
the screen when the Power Motion Manager is selected.
0 = One slave.
1 = Up to four slaves with the screen divided into four.
Parameters 960.1 (MD1) and 960.2 (MD2) set the slave parameter
input/output destination.
MD1 = 0, MD2 = 0, destination is the part program storage.
MD1 = 1, MD2 = 0, destination is the memory card.
Parameter 960.3 (PMN) sets the status of the power motion manager
function.
0 = Enabled
1 = Disabled (Communication with slaves is not performed).
Note 1: The program under which the parameters will be stored is
derived by multiplying the number of the Fanuc Beta Drive I/O link group by 10 and adding the result to the value in
parameter 8760. So if the group number is 2 and the value of
parameter 8760 is 9000, then 9000 + (2 x 10) = 9020, the parameters
will be stored in program O9020
Our advantage Products:
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【Yokogawa】Pressure Transmitter
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
(Modicon,SMC,SICK,NORGREN,Siemens etc.)
Fanuc EMH iPendant Teach Pendant Controller A05B-2518-C202 Series A05B-2518 New
Inquiry Cart
0