Honeywell PLC Control module supply Logix Redundant Net Interface Module Dual Media Type TC-CCR013
Brand Name:Honeywell
Model Number:TC-CCR013
Minimum Order Quantity:1
Delivery Time:6-8 work days
Payment Terms:Western Union,Paypal, T/T
Place of Origin:USA
Contact Now
Add to Cart
Verified Supplier
Location:
Shenzhen Guangdong China
Address:
23E BlockB,Lushan Building，Chunfeng Road,Luohu District,Shenzhen,518001,China
Supplier`s last login times:
within 25 hours
Product Details
Company Profile
Product Details
Honeywell ControlLogix Redundant ControlNet Interface Module Dual
Media Type TC-CCR013
Quick Details:
| Manufacture | Honeywell |
| Type | Measures |
| Item | TC-CCR013 |
| Control type | Control Logix |
| Module | Redundant Control Net Interface Module |
| Rate | Dual Red FW |
| Power | 24 VDC |
| Usage | CNI Redundant Media |
Description:
(1) the motor must have good chemical stability when immersed in
refrigerants and refrigerated oil for a long time. The insulation
material of the motor is required to maintain reliable insulation
performance under high temperature and high pressure and has good
resistance to refrigerants and refrigerated oil.
(2) the motor is often started under full load or overload, which requires that the starting torque is large, can run normally during overload and can adapt to a certain range of voltage fluctuations and frequent start-up requirements.
(3) in order to improve the refrigeration capacity of the equipment, the motor is required to have high efficiency.
(4) when the motor is sealed in the steel shell of the compressor, the working environment temperature is mostly above 70℃, and the temperature rise can reach about 100℃ when working. The winding coil and insulation material of the motor are required to be resistant to high temperatures and aging.
(5) because the motor is vulnerable to the impact of electromagnetic force caused by starting current, the impact of refrigerants entering the shell, the thermal shock of rapid evaporation and the mechanical vibration when starting and stopping are required, the electromagnetic coil of the motor is required to have a certain mechanical strength and can withstand vibration.
(2) the motor is often started under full load or overload, which requires that the starting torque is large, can run normally during overload and can adapt to a certain range of voltage fluctuations and frequent start-up requirements.
(3) in order to improve the refrigeration capacity of the equipment, the motor is required to have high efficiency.
(4) when the motor is sealed in the steel shell of the compressor, the working environment temperature is mostly above 70℃, and the temperature rise can reach about 100℃ when working. The winding coil and insulation material of the motor are required to be resistant to high temperatures and aging.
(5) because the motor is vulnerable to the impact of electromagnetic force caused by starting current, the impact of refrigerants entering the shell, the thermal shock of rapid evaporation and the mechanical vibration when starting and stopping are required, the electromagnetic coil of the motor is required to have a certain mechanical strength and can withstand vibration.
Details:
Installation steps of PLC field installation matters needing
attention
After arriving at the site, before the system installation, it is
necessary to consider whether the installation environment meets
the requirements of the use environment of PLC, which can refer to
the user manual of various products. But no matter what PLC, can
not be installed in the following places: places containing
corrosive gases, direct sunlight to the place, the temperature in a
short time of rapid change in the upper and lower value of the
place, oil, water, chemicals easy to enter the place, there is a
lot of dust, vibration and installation parts will cause
displacement.
If it must be used in the above environment, the appropriate
control box should be made for the PLC, with specifications and
necessary protective measures. If you need to use it at a very low
temperature in the field, you can use the control box with heating
function. How to make these protective boxes or control boxes, each
manufacturer and the qualified system integrator will provide the
corresponding supply and design for the customer.
When using control box, in the position of the control cabinet
OpenPLC installation should pay attention to the following items:
control the air flow is smooth in the cabinet (between different
devices must maintain proper distance), transformer, motor
controller, inverter, such as whether to keep a proper distance
with PLC, power line and signal line of the separation
configuration, components of the installed position is conducive to
the maintenance of in the future, whether to need to set aside
space, for future system expansion.
In addition to the above notes, there are other notes to pay
attention to.
The first important thing is electrostatic isolation. Static
electricity is an invisible killer, but many people often ignore it
because it may not be life-threatening. In dry places in northern
China, static electricity on the human body is the cause of static
electricity damage to electronic components. Even if you are struck
by static electricity, it is only a slight numbness, but it can be
fatal to PLCS and any other electronic device.
To avoid static shock there are three ways: in the maintenance or
replacement of components, please first touch the metal ground to
remove static electricity; Do not touch the connector or IC pin on
the circuit board; When the electronic components are not in use,
please use the package with static electricity isolation and place
the components inside. Imagine that the components of a PLC are a
delicate baby, and that static electricity will cause the baby's
death. It will be easier to treat the problem in the right way.
During RACK installation, after determining the positions of
various control components and slots in the control box, mark the
holes according to the size shown on the drawing, and tighten the
fixing screws until the base is firm after drilling. Before
installing the power supply module, it is necessary to pay
attention to whether the grounding end on the power cord is
connected to the metal housing. If not, it should be connected. A
bad grounding can lead to a series of problems, including static
electricity, surge, external interference, and so on. Due to
ungrounded, often PLC can also work, therefore, a lot of
inexperienced engineers mistakenly think that grounding is not so
important. It's like climbing a mountain without a protective
cable. It doesn't work when you're moving forward, but once you
slip up, without that rope, your life is over. PLC grounding, is
equivalent to the PLC on the protection cable.
When I/O module is installed, the following matters should be
noted: before I/O module is inserted into the slot on the rack, it
is necessary to confirm whether the module is a pre-designed module
by itself; When I/O module is inserted into the guide slot on the
rack, it must be inserted to the bottom to ensure that the contact
points are closely connected. The fixing screw of the module must
be locked; When the terminal block is inserted, the upper and lower
screws must be tightened. Due to the influence of transformers and
motors on site, there will be some vibration. If these screws
become loose, the module will be released from the rack.
Easy to sell industrial control network supplier GE FANUC PLC store
to provide you with TC-ccr013 detailed product price, product
pictures and other product introduction information, you can
directly contact merchants to obtain TC-ccr013 specific
information, please explain is in the easy to sell industrial
control network to see.
FAQ
* Q: Do you provide a warranty for the goods?
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any
problem, please contact us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the
warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your
specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our
customers benefit ;
We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
Send your Inquiry Details in the Below, Scan "me" Now!
Honeywell PLC Control module supply Logix Redundant Net Interface Module Dual Media Type TC-CCR013
Inquiry Cart
0