3 AXIS AC Servo Amplifier Mitsubishi MR-J4 MR-J4W3-444B 200V 400W SSC

Mitsubishi MR-J4 Servo Amplifier 3 AXIS MR-J4W3-444B 200V AC 400W

Product Details

• Melservo MR-J4 Servo Amplifier 3 AXIS SSC NETWORK (MRJ4W3444B)

• Manufacturer: Mitsubishi

• Series: MELSERVO MR-J4

Technical Specifications

Part Number: MR-J4W3-444B (MRJ4W3444B)
Module Type: Servo Amplifier
3 AXIS
Servo System Control Network (SSCNET)
SSC NETWORK
Voltage/Frequency: 200V AC
Output Wattage: 400W-400W-400W

Specification

Safety performance

• Third party certification specifications:EN ISO 13849-1: 2015 Category 3 PL e, IEC 61508 SIL 3, EN 62061 SIL CL 3, EN 61800-5-2
• Response performance :8 ms or less (STO input off → energy cutoff)
• Test pulse input (STO) :Test pulse interval: 1 Hz to 25 Hz Test pulse off time: Up to 1 ms
• Expected mean time to failure (MTTFd) :MTTFd ≧ 100 [years] (314a)
• Diagnostic range (DC) :DC = Medium, 97.6 (%)
• Average probability of dangerous failure (PFH) :PFH = 6.4 × 10-9 [1/h]

Constraints

● Main circuit power input voltage / frequency -The rated output and rated rotation speed of the combined rotary servo motor and direct drive motor, and the continuous thrust and maximum speed of the linear servo motor are for the listed power supply voltage and frequency.

● Main circuit power input Rated current -The current value when using with a three-phase power supply.

● Capacitor regeneration Reusable regenerative energy -Reusable regenerative energy corresponds to the energy generated in the following situations. Rotary servomotor: The energy generated when a machine with a moment of inertia equivalent to permissible charge decelerates and stops at the rated rotation speed. Linear Servo Motor: Energy generated when a machine with a mass equivalent to the allowable charge decelerates and stops from the maximum speed. Direct drive motor: The energy generated when a machine with a moment of inertia equivalent to the allowable charge decelerates and stops at the rated rotation speed.

● Capacitor regeneration Allowable charge equivalent moment of inertia J ・ It is the moment of inertia when deceleration is stopped from the rated rotation speed. In the case of 3-axis simultaneous deceleration, it is the total moment of inertia of the 3-axis. If there is no simultaneous deceleration, it is the moment of inertia of each axis. The direct drive motor is the same.

● Capacitor regeneration Allowable charge equivalent mass -It is the mass when deceleration is stopped from the maximum speed. Includes primary side (coil) mass. In the case of 3-axis simultaneous deceleration, it is the total mass of 3 axes. If there is no simultaneous deceleration, it is the mass of each axis.

● Allowable regenerative power of regenerative resistor with built-in servo amplifier -Since the optimum regeneration option differs depending on each system, use the drive system capacity selection software Motorizer to select the optimum regeneration option. -Refer to "Regeneration option" for the allowable regeneration power [W] when using the regeneration option.

● Dynamic brake -For the allowable load moment of inertia ratio and allowable load mass ratio when using the dynamic brake, refer to "MR-J4W2-_B MR-J4W3-_B MR-J4W2-0303B6 Servo Amplifier Technical Reference".

● SSCNETⅢ / H command communication cycle -The command communication cycle depends on the specifications of the servo system controller and the number of connected axes. -0.222 ms: Supports a command communication cycle of 0.222 ms from a servo amplifier with software version A3 or later. However, in the case of 0.222 ms, the following functions cannot be used.・ Auto tuning (real-time, one-touch, vibration control control), adaptive filter II, vibration tough drive, power monitor

● Safety performance Third-party certification standard -The safety level is determined by the setting value of [Pr. PF18 STO diagnosis abnormality detection time] and whether or not STO input diagnosis is performed by TOFB output. For details, refer to "MR-J4W2-_B MR-J4W3-_B MR-J4W2-0303B6 Servo Amplifier Technical Reference".

Contact:

Wisdomlong Technology CO.,LTD

Shenzhen Wisdomlong Technology CO.,LTD Mainly engaged in automation parts, PLCS,DCS,sensors, relays, dirves,encoder, servo drive,soft starter,touch screen,instrument,process control,electric transmission and factory automation aspects of the project design,software programming,technical service and staff training. Our company locats at the central of China,Shenzhen, Guangdong Province. With rapid development, Wisdomlong serves fields of automation in global markets, Our business covers five continents throughout the world with the basic conviction of honest, the international management of customer-centered concept and purpose of bringing convenience to customers. We have confidence to bring our customers more substantial profit with high-quality service and reasonable prices. Choosing us,you will choose a sincere friend and reliable partner. Please feel free to contact us if you are a global manufacturer of high quality brand products who desires to enter the Chinese market or who searches for a Chinese agent.We would like to create a brilliant future with friends in domestic and overseas. All goods sold have one year warranty.

The company with domestic and international numerous well-known brands supplier to build have extremely good relations of cooperation, in Japan, South Korea, southeast Asia, Africa, Europe and the United States, and formed a stable and efficient supply network. The agent and the products are widely used in machinery, equipment manufacturing, electric power, metallurgy, petrochemical, automobile manufacturing industry, paper making, chemical industry, medicine and aerospace industries.

Our Main Brand:

MITSUBISHI

YASKAWA

PANASONIC

GE FANUC

EMERSON

FISHER-ROSEMOUNT

HONEYWEL

ABB

AB

SHNEIDER MODICON

SIEMENS

................