50mm Dia Inductive Current Clamp , 1000A Current Clamp Probe For Oscilloscope
Brand Name:GFUVE
Certification:CE, UL, ISO9001
Model Number:P50
Minimum Order Quantity:3pcs
Delivery Time:3-7days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Contact Now
Add to Cart
Verified Supplier
Location:
Beijing Beijing China
Address:
Oriental HuaRui A, No. 150 Guanzhuang Road, Chaoyang District, Beijing, 100024, China
Supplier`s last login times:
within 37 hours
Product Details
Company Profile
Product Details
Theory
In electrical and electronic engineering, a current clamp is an electrical device with jaws which open to allow clamping around an electrical conductor. This allows measurement of the current in a conductor without the need to make physical contact with it, or to disconnect it for insertion through the probe. Current clamps are typically used to read the magnitude of alternating current (AC) and, with additional instrumentation, the phase and waveform can also be measured. Some clamps meters can measure currents of 1000 A and more.
Applications
The round jaw design on the P50 Series AC current clamp along with
the high content nickel metal core makes them well suited for power
quality applications where high accuracy and low phase shift along
with wide frequency are important. Measurement range is 1mA to
1200A.
The P50 current clamp is a general purpose 1000A AC current clamp
designed for use with DMMs, loggers and other instruments that have
a current input. It has a 1000:1 ratio and output of 1mA per amp or
1mV per amp measured in the jaw. The P50 has an integral 2.5m lead
terminated. The rounded jaw design on this current clamp makes it
well-suited for power applications where high accuracy 0.1% and low
phase shift and wide frequency response are important.
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
Power monitor
Phase Angle meter
Resistance tester
Features
Measurement range of 1mA to 1200A AC
Large jaw opening accommodates conductors up to two 500kcmil
Improved ergonomic design and easy operation
High content nickel metal core
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
UL, CE mark
PARAMETERS
| Electrical parameters | |||||||
|---|---|---|---|---|---|---|---|
| Ratio | 1000: 1 or 2000:1 (customized) | ||||||
| Accuracy class | 0.1%, 0.2%, 0.5% | ||||||
| Primary current | 0 - 1000A AC | ||||||
| Secondary current | 1mV/A AC, 5mV/A or (customized) | ||||||
| Max. Cont. Input current | 1200A | ||||||
| Over voltage category | CAT III 600V | ||||||
| Output signal (AC current) | 333mV, 500mV,1V,2V,5V AC at nominal input current | ||||||
| AC Accuracy(1000A Range) | |||||||
| 0-10A | ≤0.5% | ||||||
| 10-100 | ≤0.2% | ||||||
| 10-1200A | ≤0.1% | ||||||
| AC Phase Shift(1000A Range) | |||||||
| 0-10A | ≤0.5° | ||||||
| 10-100 | ≤0.2° | ||||||
| 10-1200A | ≤0.1° | ||||||
| Frequency range | 40Hz-2000Hz | ||||||
| Dielectric strength | 3KV 50Hz/60Hz at 1 minute | ||||||
| Temperature range | -20°C to +55°C | ||||||
| Output | 2.5 meter cable with D01 connector | ||||||
| Max. voltage not insulated conductors | 600 V | ||||||
| Standard | EN 61010-1, EN 61010-2-032, IEC60044-1 | ||||||
| Installation | Clamp type | ||||||
| Output mode | Lead output (2.5m) | ||||||
| Mechanical parameters | |||||||
| Dimensions (L x W x H)(mm) | 102.9 x 219.6 x 28 | ||||||
| Weight (g) | 550 | ||||||
| Holding wire diameter (mm) | φ50 | ||||||
| Max. jaw opening (mm) | 50 | ||||||
| Color | Gray or blue | ||||||
| Material | PC+ABS+Polycarbonate, UL94 V0 | ||||||
50mm Dia Inductive Current Clamp , 1000A Current Clamp Probe For Oscilloscope
Inquiry Cart
0