2.2R 3W SMT Patch Color Surround Wire Power Fuse Resistor

Brand Name:JULUN
Certification:UL
Model Number:0411 2.2R 3W 5%
Minimum Order Quantity:5000pcs
Delivery Time:7-15DAY
Payment Terms:T/T
Contact Now

Add to Cart

Verified Supplier
Location: Dongguan Guangdong China
Address: Room 408 No:262 middle West Lake Road, Shilong Town, Dongguan City ,Guangdong Province, China
Supplier`s last login times: within 25 hours
Product Details Company Profile
Product Details

SMT Patch Color Surround Wire Power Fuse Resistor 1W 2W 3W 2.2ΩR 4.7ΩR 6.8ΩR 10Ω

MOF 0207 0411 0309 Englihs versions.doc

1.Applicable Scope


Applicable Scope: This benchmark is the supply of chargers, power supply, and other energy-saving lamps used in the coating are incombustibility wound resistor type of specifications.



2-1. Type:

METAL OXIDE FILM is called “MOF”

2-2. Rated Wattage 


Shown by “W”﹑such as 1WS.

2-3.


Ωare its unit which is in accordance with JIS-C6402(E-24)series.


2-4.


It is measured by Bridge-method at room temperature and expressed by a capital letter.

F ± 1% G ±2% J ±5%


2-5

The resistor element shall consist of metal oxide film


3. Rated power


Rated power is the value of Max load voltage specified at the ambient temperature of 70℃ and shall

meet the functions of electrical and mechanical performance. When the ambient temp.surpasses above Mentioned temperature. The value declines as following


DERATING CURVE:



3-1. Rated Voltage


However, in case the voltage calculated exceeds the maximum load voltage, such the maximum load. Voltage shall be regarded as its rated voltage, means whichever less.

E=Rated Continuous Working Voltage(V)

P=Rated Power(W)

R=Nominal Resistance Value(Ω)


3-2.


MOF Value of Resistance Range 1Ω-100Ω


4. CONSTRUCTOION



1. (TERMINAL)

2. (NONFLAME PAINT WITH SOL VENT-PROOF)

3. (INSULATION COATING)

4. (FILM WERE)
5. (MATRIX)

5. SPECIFICATIONS


6. Mechanical Performance

Terminal Tensile

Fixing the resistor body, a static load of 2.5Kg is to be gradually applied into the terminal for

10seconds without causing any looseness and fall.

7.Operating Temperature Range: -55℃~275℃

8.ELECTRICAL PERFORMANCE

ITEMSPECIFICATIONSTEST METHODS (JIS C5202)
DC Resistance

Allowed under R rate tolerance


HM-9330A

Dielectric Strength TestNo evidence of flashoo-ver mechanical damage action insulation breakdown

Resistance body placed in the v-groove, use 350 V voltage pressure 60 seconds

Solder ability95% Surface of terminal covered solderInto the tin stove 270 ℃ ± 10 ℃, 5s
Resistance to soldering Heat
  • ±(1%+0.05Ω)
Into the tin stove 260 ℃ ± 5 ℃, 5~10s
Short time over load

±(2%+0.05Ω) Less than

2.5Times rated voltage for 5s
Load LifeWithin ±(5%+0.05Ω)70℃1000h Rated voltage
Resistance to solventNo deterioration of protective coating and markingsAdd thinner in 3min
IncombustibilityNo evidence of flameUL1412 standard
Fusing character ticFusing time is within 60s

Rated power x 25



9.Color Coding

10. REQUIRENTS IN USE


1.IN THE HIGH HUMIDITY SITUATION, IT WILL MAKE THE SOLDER ABILITY

WORST. PLEASE PRESERVE THE RESISTORS IN 40℃ ,70 RH BELOW

2. PLEASE DON`T OPEN THE MINE PACKAGE WHEN YOU PRESERVE IT

3. WHEN IN THE HIGH TEMPERATURE SITUATION, PLEASE ACCORD TO THE

PICTURE OF “POWER DERATING CURVE” REDUCE THE USE OF POWER RATING

4.YOU SHOULD AVOID THE CONNECTOR OF RESISATNCE REPLACED BY LATGE

VOLTAGE AND POWER


11. Packaging reel sizes


12. With the sizes



TapeABWEFPOP1P2ΦDOT
02072.4±0.106.30±0.112.0±0.11.75±0.15.50±0.054.00±0.104.00±0.102.00±0.051.50+0.102.50±0.10
03093.30±0.209.00±0.1016.0±0.301.75±0.107.5±0.104.00±0.108.00±0.102.00±0.051.50+0.103.30±0.20
04114.30±0.1011.20±0.1024.0±0.301.75±0.1011.5±0.104.00±0.108.00±0.102.00±0.101.50+0.104.30±0.10


13. (Version change records)


DateP/N.P/NChangesBefore the changeAfter the change
2017-12-08RXM 0207J--0309J--0411JFrist publish


China 2.2R 3W SMT Patch Color Surround Wire Power Fuse Resistor supplier

2.2R 3W SMT Patch Color Surround Wire Power Fuse Resistor

Inquiry Cart 0